manualshive.com logo in svg

GE Medical Systems 500, Руководство пользователя, Страница: 71 / 636

Поделиться
Скачать
GE Medical Systems 500 Скачать руководство пользователя страница 71

System Positioning/Transporting

LOGIQ    500 Basic Users Manual
2276612–100  Rev. 0

3–13

Moving the System (cont’d)

1

Handle

2

Storage Area Behind Door

Figure 3–7.  Location of Storage Area

6.

Connect all probes to be used while off site.  Ensure
that probe cables are out of the way from the wheels
and not protruding beyond the console.

NOTE: If more than three (3) probes are intended to be used,

store the additional probes securely in the front storage
area.

7.

Store all other probes in their original cases or in soft
cloth or foam to prevent damage.

8.

Store sufficient gel, optical disks, and other essential
accessories in the provided space.

9.

Adjust the monitor to its lowest position possible.
Ensure that the monitor arm is locked in place.

10. Unlock the front wheels.

Содержание 500





























































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов