GE HEALTHCARE CARESCAPE Monitor B450, Техническое руководство

Страница: 162 / 236

CARESCAPE Monitor B450
154
2062973-003
2. For more detailed information, select Advanced tab .
NOTE: Refer to the Module Frames and Modules Technical Manual for information about PDM
battery.
11.7 Error messages and codes
The following error messages display in the message field if there is a problem with the patient
monitor.
Refer to the patient monitor’s user’s manual for a complete list of system messages. Refer to
Module Frames and Modules Technical Manual for a list of parameter module specific error
messages.
Field Description
Remaining capacity (mAh) Remaining capacity of the battery in mAh.
Full capacity (mAh) Full capacity of the battery in mAh.
Full capacity compared to new (%) Full capacity of the battery compared to the
nominal full capacity of a new battery.
Cycle count The total count of charging and discharging
cycles of the battery.
Voltage (V) Battery voltage.
Current (mA) Battery current. Positive when charging,
negative when discharging.
Temperature (°C or °F) Battery temperature.
Message Possible causes Possible solutions
License expired A trial license has expired. Enable the license with a new
activation code, if needed.
Configuration
changes. Restart
required Pending configuration
changes to platform settings
that require patient monitor
restart. Power cycle the patient monitor.
Network down No other network device
observed on the MC Network. Verify that the patient monitor is
connected to an active network.
Identical unit & bed
name noticed A patient monitor with the
identical unit and bed name is
on the network. Disconnect the patient monitor that
has the identical unit and bed name.
or
Change the unit and bed name of the
duplicate patient monitor unit and bed
name.