60
Makin
g
/Receivin
g
Phone Calls
<1
86/
18
4>
<186/184>
Showing/Hiding Your Caller ID For Individual Calls
If the other party’s phone supports caller ID display, you can show your phone number (caller ID) on
the other party’s phone (display) when making a voice or videophone call. Since your caller ID is
important information, be careful when disclosing it.
d
“PushTalk setting” is available for setting whether to show your caller ID when making Push-to-Talk calls.
→
p.106
Adding the 186/184 prefix to the other party’s phone number
To show your caller ID each time you make a call, add the “186” prefix to the phone number to dial. To
hide your caller ID, use the “184” prefix.
d
Dialing with the “186” or “184” prefix is disabled for international calls. To make them, select “Notify Caller
ID” from the function menu.
→
p.51
■
To show your phone number
Voice calls: 186 - (the other party’s phone number) -
r
Videophone calls: 186 - (the other party’s phone number) -
o
(
)
■
To hide your phone number
Voice calls: 184 - (the other party’s phone number) -
r
Videophone calls: 184 - (the other party’s phone number) -
o
(
)
<Pause dial>
MENU84
Sending Push Signals Quickly
Sending push signals from your FOMA terminal enables you to send messages to QUICKCAST
*
or to
use services such as ticket ordering and bank balance requests.
Storing dialing data in Pause dial
You can store dialing data to send as push signals beforehand into Pause dial. Inserting a pause (p)
into the dialing data allows you to send data with a separation where a pause lies.
d
You can store one dialing data entry, consisting of up to 128 characters.
d
Dialing data can contain numbers from 0 to 9, the # and
*
symbols, and pauses (p).
d
You cannot enter pauses (p) in succession or at the beginning of the dialing data.
1
i
X
X
“Dialing”
X
“Pause dial”
The “Pause dial” screen appears.
■
If there is dialing data already stored
The stored dialing data appears.
2
o
(Edit)
X
Enter the dialing data
Press
0
to
9
,
q
and
w
to enter dialing data.
■
To enter a pause (p)
X
w
(1 second or longer)
Function
Description
Refer to
Caller ID Notification
Sets whether to show your caller ID when making a call.
p.47
184/186
Uses the 184 and 186 prefixes to specify whether to show your caller ID
every time you make a call.
p.60
Notify Caller ID
Accesses the function menu to specify whether to show your caller ID
every time you make a call.
p.51
NOTE
e
If you hear a message requesting your caller ID, dial the number again using the “186” prefix.
e
If you make a call with “186” or “184”, the phone number including this prefix is logged in the Redial or Dialed calls
record.
Ｖ．ｐｈｏｎｅ
Ｖ．ｐｈｏｎｅ
Pause dial
Ｐａｕｓｅ ｄｉａｌ
Ｅｄｉｔ
ＦＵＮＣ
Function menu
¨
p.61
Settings
