42
Gettin
g
Started
C
ha
rg
ing a
FO
MA
T
e
rm
ina
l
Charging a FOMA Terminal
d
You can charge a FOMA terminal using the AC or DC adapter (optional). You can also charge the terminal
by connecting the optional AC adapter and desktop holder. For more information on charging, refer to the
user’s manual provided with the AC adapter or DC adapter.
Charging with the AC adapter or DC adapter
■
AC adapter
■
DC adapter
1
Open the external connector cap on a FOMA terminal
2
Plug the AC or DC adapter connector horizontally into the external
connector on the FOMA terminal
3
Plug the AC adapter into the outlet
Plug the DC adapter into the cigarette lighter socket in a car
Charging starts.
4
After charging is completed, remove the AC or DC adapter connector
horizontally from the FOMA terminal while pressing the release
button
5
Unplug the AC adapter from the outlet
Unplug the DC adapter from the cigarette lighter socket in a car
6
Close the external connector cap on the FOMA terminal
Standard charging time
Approx. 120 min.
NOTE
e
When the charge lamp on a FOMA terminal (Phone) turns off, “
” on the display disappears and the message
“Charge unusual Stop charge” appears, disconnect a FOMA terminal from the AC adaptor or DC adaptor and
remove the battery pack. Then set them again for recharging. If the same error occurs again, there may be a
problem or fault on the AC adaptor or DC adaptor. Contact a NTT DoCoMo shop or service counter.
e
Keep pressing the release button of the AC adapter connector when pulling it out of the external connector on a
FOMA terminal. Using excessive force to pull the cord may cause malfunction.
Cigarette lighter socket
Plug
FOMA DC Adapter 01
Connector cap
Release
button
Plug the connector with arrows
side facing upward
FOMA AC Adapter 01
Plug
100 V AC power outlet
Connector