131
Tone/Display/Li
g
htin
g
Settin
g
s
<V
ib
ra
to
r>
MEN
U
5
4
<Vibrator>
MENU54
Vibrating a FOMA Terminal When a Call or Mail Arrives
You can set a FOMA terminal to use different vibration patterns for voice calls, videophone calls,
Push-to-Talk calls, e-mail, chat mail and MessageR/MessageF respectively.
1
i
X
X
“Incoming call”
X
“Vibrator”
X
Select any item
2
Select a vibration pattern
A FOMA terminal vibrates in the selected pattern.
The following icons shown on the standby screen indicate for which function the FOMA terminal vibrates:
: Shows that vibration starts when receiving a voice call, videophone call or Push-to-Talk call.
: Shows that vibration starts when receiving a mail, chat mail, MessageR or MessageF.
: Shows that both “
” and “
” are set.
Phone
Sets vibration for voice calls or 64K data communication.
Videophone
Sets vibration for videophone calls.
PushTalk
Sets vibration for Push-to-Talk calls.
Sets vibration for i-mode mails, SMS and packet communication.
Chat mail
Sets vibration for chat mails.
MessageR
Sets vibration for MessageR.
MessageF
Sets vibration for MessageF.
Pattern 1
Vibrates in Pattern 1.
Pattern 2
Vibrates in Pattern 2.
Pattern 3
Vibrates in Pattern 3.
Melody linkage
Vibrates in the pattern specified for the melody set as the ring tone. However, if no vibration pattern is
specified for the melody or an i-motion is set as the ring tone, Pattern 2 is used.
OFF
Does not vibrate.
NOTE
e
To enable “Mail”, “Chat mail”, “MessageR” and “MessageF” in “Vibrator”, set the respective items in “Mail/Msg. ring
time” to “ON”.
e
When “Vibrator” is set to other than “OFF”, take care not to let the vibrating FOMA terminal get close to fire (e.g.
space heater) or fall off a table, etc.
e
When “Ring volume” is set to other than “Silent” and the vibrator is set, a FOMA terminal uses a ring tone and
vibration to notify you of incoming calls. When “Ring volume” is set to “Silent”, a FOMA terminal uses vibration only.
e
The vibration level is always fixed regardless of the ring volume setting.
e
When “Melody linkage” is set, the vibration pattern may not match the main theme.
<Vibrator priority sequence>
e
Priority is assigned as follows for the vibrator when the incoming settings are duplicated.
①
Vibration setting for Discern connect
→
p.123
②
Vibration setting for Discern group
→
p.123
③
Vibrator setting
Default setting
All OFF
Settings