101
Continued on next page
Push-to-Talk
<
E
nd P
us
hT
a
lk
>
d
Automatically answering an incoming PTT call <Auto answer setting>
You can set to automatically answer an incoming PTT call in hands-free mode.
d
Setting the Auto answer setting to “ON” sets the hands-free ON when answering automatically no matter
whether the FOMA terminal is folded, causing the voices to come out of the speaker.
1
PushTalk phonebook screen (p.103)
X
p
(FUNC)
X
“PushTalk setting”
X
“Auto answer setting”
Select “ON” or “OFF”.
d
Joining a PTT call in progress
Follow the step below to join a PTT call in progress later on if you make a “Disconnected” response
while receiving the PTT call or if you miss the call while the Public mode (Driving mode) is set:
1
Received calls screen (p.67)
X
Use
c
to select a PTT call,
then press
P
The “PushTalk talking” screen (p.98) appears.
<End PushTalk>
Ending a Push-to-Talk Call
1
During a PTT call
X
y
■
If you made a call
Pressing
y
ends the PTT call and disconnects all the participants.
■
If you received a call
If it is a group call, pressing
y
does not end the call and the call continues, but the participants will know
that you left the call.
If other members continue a PTT call after you leave the call, you can join (rejoin) the call in progress.
→
p.101
When the caller presses
y
, the PTT call ends and all the participants are disconnected.
e
When the FOMA terminal is folded, you answer an incoming call in hands-free mode.
e
If a flat-plug earphone/microphone with switch (optional) is attached, pressing the switch also allows you to answer
a call.
e
When receiving a PTT call, pressing
y
does not allow “On hold”. Doing so causes a “Disconnected” response.
e
A “Disconnected” response will be made to a call from a phone number specified in “Call rejection” or “Reject
unknown”.
e
You cannot answer a PTT call incoming during a voice call, videophone call, PTT call or data communication. If the
current call is a voice call or PTT call, the missed call record is registered.
e
If a PTT call is received during i-mode communication, the operation follows the “Set i-mode arrival act” settings.
→
p.106
NOTE
e
The “ON” setting is unavailable in manner mode.
e
While the Public mode (Driving mode) is set, you cannot answer an incoming call regardless of the “Auto answer
setting”, but the participants will know that you are driving.
e
The “Auto answer setting” set to “ON” has priority over the settings of “Automatic answer” or “Ring time setting”
(p.106) under the PushTalk setting.
NOTE
e
If other members continue a PTT call after you leave the call, follow the step above to join (rejoin) the call in
progress.
e
You cannot join a call in progress if it is one-to-one or if it is already finished. In this case, you make a PTT call
(p.99) to parties selected in the step above.
NOTE
e
A confirmation tone sounds when one of the participants leaves the call.
e
When all the participants other than the caller leave the call, the PTT call ends.
e
If “Setting when folded” (p.106) is set to “End the call”, a PTT call ends when the FOMA terminal is folded. When a
flat-plug earphone/microphone with switch (optional) is attached, however, communication continues.
Default setting
OFF
