487
Continued on next page
Appendix/External Devices/Troubleshootin
g
<
S
of
tw
a
re
U
pda
te
>
Memory dial (phonebook function) and downloaded information
d
It is your responsibility to back up all data stored on your FOMA terminal. NTT DoCoMo is not responsible
for any deletion, alteration, or loss of data.
d
Upgrading the model or repairing your mobile phone may alter or erase data that you have created, copied
or downloaded. NTT DoCoMo is not responsible for any deletion, alteration, or loss of data. As a matter of
convenience, NTT DoCoMo may replace your mobile phone with the substitute instead of repairing, when
most of the data cannot be transferred to the substitute. As for your FOMA terminal, images or melodies
downloaded from the official i-mode site will be transferred in the course of repairs. (Some contents cannot
be transferred. Data may be unable to be transferred depending on the malfunction.)
<Software Update>
Updating Software
Check whether it is required to update software on the FOMA terminal. Download and update the
software via packet communication if necessary.
You will be notified of the update in the DoCoMo website or in “
お知らせ＆ヘルプ
” (News & Help) of
iMenu.
d
No charges will be made for packet communication to update software.
d
There are two methods to update:
Now update: Updates immediately.
Reserved update: Updates automatically on the set date and time.
d
You can update software if the i-mode host is set to the user defined host.
d
Updating (downloading and installing) software may take some time.
d
When you update software, an SSL connection is established with the server (the software update server
managed by DoCoMo). Validate the certificate beforehand (Default setting: Valid. Setting procedure
→
p.232).
d
Ensure that the battery is fully charged before updating software.
d
It is recommended to update software without moving in a place where the reception is good (the signal
strength indicator shows three bars).
* If the reception becomes poor and then the download is interrupted, attempt to update again in a place
where the reception is good.
d
Updating software with the “PIN1 code entry set” set to “ON” displays the PIN1 code entry screen in the
automatic restart after installing the software. You cannot receive a call or message until you enter the
correct PIN1 code.
d
You cannot update software:
d
You cannot use another function while updating software. However, you can receive a voice call during
download.
d
If the software has already been updated, the message “No update is needed Please continue to use as
before” appears when you check for new software updates.
d
After updating software, the i-mode center storage status icon disappears. In addition, if the receive option
is set to “ON” and a message is received while updating software, the message notification screen may
not appear after the software has been updated.
d
When you update software, the FOMA terminal-specific information (model, product number, etc.) is
automatically sent to the server (the server for software updates managed by DoCoMo). The information
sent to DoCoMo is used only for updating software.
d
You can update software without affecting data such as phonebook entries, camera images and
downloaded data. However, be aware that depending on the state of your FOMA terminal (malfunction,
damage or exposure to water) you may be unable to protect data.
d
It is recommended to back up important data (Note that you cannot back up some data, e.g. downloaded
data).
a
When the FOMA card (UIM) is not inserted
a
When the FOMA card (UIM) is used incorrectly
a
While PIN lock is set
a
When the PUK code is locked
a
When the date and time are not set
a
When you receive a call
a
When you receive a message or SMS
a
During a voice call
a
During a videophone call
a
During a PTT call
a
During i-mode communication
a
During 64K data communication
a
During packet communication
a
While Lock all or Omakase Lock is set
a
While Self mode is set
a
While PIM lock is set
a
When you are out of range
a
When packet dialing is restricted
a
During international roaming
a
When you are using mova terminal for the Dual Network
service
a
When you are using a miniSD reader/writer
a
While another function is running
