185
Camera
<
P
hot
o m
ode
>
<Photo mode>
Shooting Still Images
Use the built-in camera to shoot still images.
c
You can shoot with a FOMA terminal folded.
→
p.188
c
You can also save the shots directly in the
miniSD memory card.
c
You can specify the folder to store images. You
can also set a FOMA terminal to save shot
images automatically in the specified folder after
shooting.
How to shoot still images
The auto focus function is available for shooting
still images with the rear camera.
c
Press
f
on the “Photo mode” screen (p.185) to
turn on/off the auto focus.
c
Switch between ON and OFF to select any of the
following three shooting methods:
Shooting with a FOMA
terminal opened
<Shoot open>
1
On the standby
screen
X
d
X
“
”
X
d
The “Photo mode” screen
appears.
Pressing
s
(
) for 1 second
or longer on the standby
screen also launches the
“Photo mode” screen.
■
To turn on/off the auto
focus
X
f
■
To shoot with a FOMA terminal folded
“Shoot folded”
→
p.188
2
Point the camera at
an object
X
d
or
s
(
)
The image is shot. The incom-
ing call lamp lights in red for
approx. 3 seconds. The “image
checking” screen appears.
■
To shoot with Focus
fixed
X
Set the auto focus to
“OFF”
X
d
or
s
(
)
■
To retake the shot
X
t
X
“YES”
3
d
The shot image is stored in the folder specified in
“Select to save” (p.188).
Method
Auto focus
Description
Auto focus
ON
When you release the shutter,
the focus is automatically
adjusted on the object in the
center of the screen.
→
p.185
The center of the screen is
focused and then a still image
is shot. When the subject is
focused, the focus frame turns
green. When the subject is not
focused, the focus frame turns
red.
AF lock
Lock the focus on an object
before releasing the shutter.
→
p.186
E.g. when an object you want
to shoot is off-centered on the
screen, you can manually
focus on the object and
change the composition.
Focus fixed
OFF
Shoots without using the auto
focus.
→
p.185
You can quickly shoot a still
image so that you do not miss
the shutter chance.
NOTE
e
The auto focus ON/OFF setting changed during
shooting are retained while the camera runs. The
auto focus is always set to “ON” when the camera
launches.
e
Keep a distance of at least 10cm from an object when
using the auto focus function.
e
Turn the auto focus “OFF” if the object cannot be
properly focused because:
a
It is dark
a
The object is poorly contrasted (there is little differ-
ence between bright and dark)
a
There are close objects and remote objects seen
through the lens
a
There is a light or something in the shooting area
a
The object is moving
a
You are shaking a FOMA terminal
e
Completing the focus lock fixes the camera bright-
ness. If the camera is moved after completing the
focus lock, the camera brightness may be inappropri-
ate then. In this case, retry the focus lock, or cancel
the AF lock to adjust the brightness.
Photo mode
ＦＵＮＣ
Ｒｅｃｏｒｄ
Function menu
¨
p.186
Image checking
ＦＵＮＣ
Ｓａｖｅ
Function menu
¨
p.187
