90
Making/Receiving
Video
p
hone Calls
<
H
an
d
s
-f
re
e
sw
it
ch
>
Checking your appearance during a videophone call <Visual check>
1
Videophone in-call screen (p.81)
X
p
(FUNC)
X
“Visual check”
You can use the image from the built-in camera to check your appearance.
“
” is displayed during a visual check.
A substitute image is sent to the other party.
2
p
(FUNC)
X
“Visual check off”
Visual check ends. The screen returns to the state before the visual check.
Enlarging the image to be sent
During a videophone call, you can enlarge your camera image that is sent to the other party.
d
If you are sending an image captured by the rear camera, you can enlarge the image by up to 9 (in 16
steps). An image shot using the front camera can be enlarged by up to 2 (in 2 steps).
d
If you switch between the front and rear cameras during a videophone call, the respective zoom settings
are retained. When the videophone call ends, the image reverts to normal scale.
d
You cannot enlarge an image while sending a substitute image.
1
During a videophone call
X
v
X
Zoom in or out
<Hands-free switch>
Setting Hands-free for Videophone Calls
You can set a FOMA terminal to automatically switch to the hands-free mode when a videophone call
starts.
1
Videophone setting screen (p.88)
X
“Hands-free switch”
X
“ON” or
“OFF”
<Select image>
e
Some GIF images may not be set in “Original”.
e
You can switch between a camera image and a substitute image during a videophone call.
e
To check an image, select an item you want to check and press
o
(Play).
e
Changing the setting from “Original” to “Pre-installed” or “Chara-den” does not delete the stored image.
e
The set still image is displayed both on your FOMA terminal and the other party’s terminal. However, the answering
message for a recorded message is only sent to the other party’s terminal.
e
You cannot delete the “Original” setting. Setting “Set as display” (p.328) in My picture also allows you to change the
“Original” setting. If the original image to be pasted is deleted, the “pre-installed” message is shown on (sent to) the
callee’s terminal.
e
When the Chara-den character set as the substitute image is deleted and the “Chara-den” substitute image cannot
be displayed, the “Dimo” stored at default is sent. If you have already deleted “Dimo”, a preinstalled still image is
transmitted as an alternative image.
<Auto redial as voice>
e
When a videophone call is switched and redialed as a voice call, the call is charged as a voice call and digital
communication charges do not apply.
e
When a call is redialed, only the voice call is logged in the “Redial” or “Dialed calls” record.
e
Even if “Auto redial as voice” is set to “ON”, it may not be possible to redial due to the circumstances of the network
or the other party, such as busy.
NOTE
e
Even if “Hands-free switch” is set to “ON”, you can cancel the hand-free operation by pressing
o
“
” during a
call.
１ｍ３２ｓ
Default setting
ON
