365
Continued on next page
<I
n
fr
a
re
d
d
a
ta
exch
an
g
e
/O
B
E
X
>
Display/Edit/Or
g
anization/Music Playback
Transferring data via
infrared data exchange
c
Set the receiving FOMA terminal to standby, and
keep 20cm or less between the FOMA terminals.
c
Place the FOMA terminals on a stable surface,
such as a table, so that the infrared data ports
are aligned on the same level and facing each
other.
c
Do not move the FOMA terminals during data
exchange.
c
Do not place anything between the FOMA termi-
nals or cover the infrared data ports.
c
If data exchange is finished unsuccessfully,
adjust the positions then retry the exchange.
c
The FOMA terminals may not communicate suc-
cessfully if they are placed under direct sunlight,
directly under a fluorescent light, or close to
other infrared equipment.
Transferring data via cable
connection
c
To transfer data, you need the software such as
“FOMA N902iS Data Link Software”.
“Data Link Software”
→
p.472
c
Before transferring data, set “USB mode setting”
to “Communication mode”.
→
p.362
Note on transferring data
Before data transfer
c
You cannot transfer data while another function
is running. Exit all other functions before trans-
ferring. You cannot run another function while
transferring data.
c
You cannot transfer data while making/receiving
a voice call/videophone call/Push-to-Talk call or
using i-mode, packet communication or 64K data
communication.
→
p.470
c
You cannot transfer data while Lock all, Self
mode or Omakase Lock is set.
c
You cannot receive data stored in the phonebook
while “Restrict dialing” is set. However, you can
send data with “Restrict dialing” and data in
“Own number”.
c
Whether you can transfer data may depend on
the status of the other party’s FOMA terminal. If
you transfer with the terminal whose model is dif-
ferent from yours, it may not reflect the settings
of received messages or bookmark folder tree,
or may not receive a Deco-mail message cor-
rectly.
c
The data transfer function via infrared data
exchange or cable connection conforms to the
IrMC1.1 standard. You may be unable to exchange
data with the terminal or a PC that does not conform
to IrMC1.1. Some data may not be transferred cor-
rectly even if the terminal or application of the other
party conforms to IrMC1.1.
c
When transferring a still image, melody, movie/
i-motion, PDF document, PushTalk phonebook
or ToruCa via cable connection, which does not
comply with IrMC, you need the transferring soft-
ware compatible with FOMA N902iS.
c
You may be unable to transfer data via infrared
data exchange if the FOMA USB Cable
(optional) is connected.
During data transfer
c
The FOMA terminal is out of range, which means
that you cannot make/receive a voice call/video-
phone call/Push-to-Talk call or use i-mode, i-mode
mail, packet communication or 64K data commu-
nication. However, the FOMA terminal may
receive an incoming call or message immediately
after starting data transfer. In this case, the trans-
fer will be canceled. After the transfer is finished,
the out of range status may continue for a while.
c
Infrared data exchange will be canceled and a
message appears asking whether to continue
the communication when:
a
The receiving device does not receive data
within 30 seconds or so
a
The sending device cannot find the receiving
device
Select “YES” to retry the communication. Select
“NO” to cancel the communication.
If you do not select “YES” or “NO” within 30
seconds or so, the infrared data exchange will be
automatically finished.
■
Important
c
Ensure that the FOMA terminal and a PC are
properly connected. An improper connection may
not only prevent data transfer but may also result
in data loss. Install the N902iS communication
setting file (driver).
→
p.423
c
Attempting to transfer data with the FOMA
terminal’s battery low or empty may not only
prevent data transfer but may also result in data
loss. Make sure that the FOMA terminal’s battery
is fully charged. Also check the PC’s power.
c
All data on the FOMA terminal may be deleted if
an error occurs while transferring all from a PC to
the FOMA terminal. Before transferring all, check
the cable connection, the FOMA terminal’s battery
level and the PC’s power.
20cm or less
Infrared data
port
Within the
range of ±15º
