400
* The miniSD memory card is optional for use in this terminal.
→
p.353
Other Useful Functions
<
N
ot
ic
e
de
s
igna
te
c
a
lls
>
<Notice designate calls>
Setting the Upper Limit of
Charge to Show the Alarm
The standby screen or alarm notifies you when
the accumulated charge indicated in “Call data”
exceeds the specified cost limit.
c
The alarm is given only once when the accumu-
lated charge exceeds the limit set in advance.
c
Exceeding the limit does not prevent you from
making calls.
1
i
X
X
“Call time/Charge”
X
“Notice designate calls”
X
Enter
your security code
2
Set the respective parameters
3
o
(Finish)
d
Alarm actions
When the accumulated charge exceeds the cost
limit after a call, you are notified as follows:
■
When Notify cost limit is set
to “ON” and Alarm tone is
set to other than “OFF”
When the accumulated charge
exceeds the preset cost limit, the
alarm starts sounding in three
seconds after you finished talking
and lasts about five minutes, which opens the
screen notifying that the accumulated charge has
exceeded the limit. To stop the alarm tone, press any
key. After the alarm, pressing
t
or
y
shows the
“
” (Notice designate calls) desktop icon on the
standby screen.
■
When Notify cost limit is set to “ON” and
Alarm tone is set to “OFF”
When the accumulated charge exceeds the preset
cost limit, the “
” (Notice designate calls) desktop
icon appears on the standby screen.
d
Checking the details of “
”
(Notice designate calls)
Selecting the “
” (Notice designate calls)
desktop icon on the standby screen shows the
details of Notice designate calls.
1
On the standby screen
X
d
X
“
”
X
Enter your security code
The alarm information on “Notice
designate calls” is shown.
2
Check the details
X
d
The standby screen reappears and the “
”
(Notice designate calls) desktop icon disappears.
e
When Auto reset total cost is set to “ON”, the PIN2
code entry screen appears when a FOMA terminal is
turned on.
e
Auto reset total cost is set to “OFF” if:
a
You turn on a FOMA terminal without the FOMA
card (UIM) inserted.
a
You press
t
on the PIN2 code entry screen.
a
The PIN2 code is locked.
→
p.157
a
The FOMA card (UIM) is failed.
Default setting
Cost limit: Not set
Notify cost limit: OFF
Cost limit set-
ting
Sets the cost limit between
￥
10 and
￥
100,000 by
￥
10.
Notify setting
• Notify cost
limit
Specifies whether to give an alarm
when the cost limit is exceeded.
Setting “OFF” does not given an
alarm.
Setting “ON” gives an alarm following
the settings of “Alarm tone” and
“Volume”.
• Alarm tone
Selects an alarm tone. If you have
created folders, they appear after the
“Pre-installed” option. “Clock Alarm
Tone” can be selected from the “Pre-
installed” folder.
“Changing the Ring Tone”
→
p.128
• Inbox
Selects a melody downloaded from
an i-mode site or website as a ring
tone.
• Pre-
installed
Selects an alarm tone from the pre-
installed ring tones and melodies.
• Voice
announce
Selects “Voice announce 1” or “Voice
announce 2” for an alarm tone.
“Recording and Playing Alarm Tones
and On Hold Tones”
→
p.398
• OFF
Does not sound an alarm.
• Volume
Use
c
to set the alarm tone volume.
“Adjusting the Ring Volume”
→
p.69
Settings
NOTE
e
The alarm volume applied while in original manner
mode is the same as that specified in “Phone vol.”
under “Original”.
e
The charges for Push-to-Talk calls, i-mode and
packet communication and Chaku-moji transmission
are not supported by this function. To check i-mode
communication charges, see the “i-mode User’s Man-
ual” you received at the time of contract.
NOTE
e
The “
” (Notice designate calls) desktop icon disap-
pears if the cost limit is changed to the one exceeding
the current total calls cost in “Cost limit setting”.
９／２２ １１：５０
￥３０００
Ｃｏｓｔ ｌｉｍｉｔ
Ｄａｔｅ
Ｓｅｔ−ｕｐ ｃｏｓｔ ｌｉｍｉｔ
ｉｓ ｅｘｃｅｅｄｅｄ
Ｎｏｔｉｃｅ ｄｅｓｉｇｎａｔｅ ｃａｌｌｓ
