Extreme Networks EPICenter 6.0 Скачать руководство пользователя страница 518 | Manualshive

Страница: 518 / 580

background image

The ACL Viewer

EPICenter Reference Guide

518

The rows in the comparison display are displayed in colors that indicate the status of the rule:

The columns in the display show information as follows:

View Policy Rules

The Policy Rules display shows details of the Ideal Source Port QoS rules, as generated by the
EPICenter Policy Manager. The information in this display is as follows:

View Configured Rules

The Configured Rules display shows details of the VLAN QoS rules that are actually configured on the
device, either through the EPICenter Policy Manager or the ExtremeWare CLI. The information in this
display is as follows:

White

The rule is valid, and has been configured on the device. Both the Ideal and Configured
sides of the table are filled in.

Yellow

The EPICenter-generated “ideal” rule conflicts with a rule already configured on the
device. Two rules conflict when the traffic patterns for the rule are the same but the
treatment specified (the QoS profile) is different. Both the Ideal and Configured sides of
the table are filled in.

Blue

The rule is configured on the device, but it was not generated by the EPICenter Policy
Manager. Only the Configured side of the table is filled in for these rules.

!

(exclamation point)

An empty column used to invoke a sort by policy precedence. Clicking the column
header will sort the policies in policy precedence order.

Policy

Displays the name of the policy.

Ideal Rule VLAN

The VLAN specified by this policy.

Ideal Rule Profile

The QoS profile specified for this traffic flow by this policy.

Config Rule VLAN

The VLAN to which the QoS rule applies.

Config Rule Profile

The QoS profile that applies to this VLAN.

!

(exclamation point)

An empty column used to invoke a sort by policy precedence. Clicking the column
header will sort the policies in policy precedence order.

Policy

Displays the name of the policy.

VLAN

The VLAN specified by this policy.

Profile

The QoS profile that is specified for this VLAN by this policy.

To be used

Indicates whether the rule is acceptable for configuration on the device (not in conflict
with any other rules). Values for this column are:

• Yes, the rule can be used.

• No (duplicated) indicating that the rule duplicates another rule.

• No (disabled) indicating that the policy is disabled.

VLAN

Specifies the VLAN to which the VLAN QoS rule applies.

Profile

The QoS profile that applies to this traffic flow.

«
...
516
517
518
519
520
...
»

Содержание EPICenter 6.0





































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для EPICenter 6.0

70 MC - ZR70MC MiniDV Digital Camcorder

Бренд: Canon Страницы: 57

Бренд: TANDBERG Страницы: 66

Content Server None

Бренд: TANDBERG Страницы: 14

ABBEY ROAD THE KING'S MICROPHONES

Бренд: Waves Страницы: 16

Бренд: Barco Страницы: 22

Compliance Appliance

Бренд: TANDBERG Страницы: 41

WISE MOBILE DEVICE PACKAGE EDITOR 7.0 SP2

Бренд: Symantec Страницы: 22

Telephony Modem Simulator

Бренд: Intrinsyc Страницы: 2

Бренд: Denon Страницы: 29

Бренд: MGI Страницы: 19

Wireless Pocket USB

Бренд: DirekTronik Страницы: 37

Бренд: Nordic Messaging Technologies Страницы: 62

Бренд: Z3 Technology Страницы: 8

Бренд: FieldServer Страницы: 17

Бренд: Bay Networks Страницы: 112

DIRECTOR MX-USING DIRECTOR MX

Бренд: MACROMEDIA Страницы: 624

Бренд: FARONICS Страницы: 99

Бренд: Oregon Scientific Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды