Extreme Networks EPICenter 6.0, Справочное руководство

Страница: 213 / 580

The Macro Editor
EPICenter Reference Guide
213
To add a trap variable to a macro, you:
1 Place the cursor in your macro where the variable should go
2 Select $trap from the system variable list,
3 Click Enter to insert the variable
4 Add the correct varbind index (in parentheses).
You can determine the correct index by looking at the Actions tab in the Alarm Definition for the alarm
that will execute this macro -- the Details>> button will display the varbinds and indices associated
with the trap event specified for the alarm. See “Defining Alarm Actions” on page 121 .
When you have finished creating or editing your macro and saved it, you will be able to select it in to
use as an action for the alarm associated with the trap.
Figure 103: Specifying trap varbinds in a Telnet macro
Because the variables may return values in a form that is not usable in a CLI command, two functions
are provided to convert values to CLI-readable formats. These are:
●
$ToCliPort()
— converts a port IfIndex to the slot:port format
●
$ToCliVlanName()
— converts a VLANID to a VLAN name.
For example, for the trap
extremeEdpNeighborAdded
, the variable
extremeEdpPortIfIndex
is returned
as the second varbind (index=1).