Extreme Networks EPICenter 6.0, Справочное руководство

Страница: 65 / 580

Discovering Network Devices
EPICenter Reference Guide
65
The buttons below the list of devices have the following functions:
NOTE
If you select multiple devices, make sure the devices you select have identical contact information. As part of the
Add process, you will be asked for a single password that applies to all the selected devices. If the password is
specified incorrectly for any of these devices, the add will fail for those devices.
When you click Add , a window appears where you must set additional device options such as a write
community string, the device group to which the devices should be added, a default device login,
password, and if SSH is used (see
Figure 21 ).
NOTE
Make sure the device passwords are correct for the selected devices. If you are adding multiple devices in one
operation, make sure the passwords you specify are correct for each device. A device cannot be added if the
password is not correct.
Figure 21: Setting default device options for discovered devices
3 Enter or make changes to any of the Basic fields. These options apply to the entire set of devices
you are adding.
Add Attempts to add selected devices to the EPICenter Inventory database.
Close Closes the Discovery Results window. If you close the Discovery Results window without
adding devices, the results for devices not already in the EPICenter database are lost.
Hide Details Hides the Discovery status details that are displayed during the Discovery process.
View Details Re-displays the Discovery status details (appears only after Discovery details have been
hidden)
Reset Clears your selections from the discovered devices list.
Device Login The default Device Login EPICenter should use to access the discovered switches.
Device Contact Password The default Device Contact Password EPICenter should use to access the discovered
switches.