Extreme Networks EPICenter 6.0, Справочное руководство

Страница: 458 / 580

EAPS Protocol Monitoring and Verification
EPICenter Reference Guide
458
■
A Red M indicates the status is failed.
For a Transit node:
■
A Green T means both ring ports are up and forwarding
■
A Yellow means a ring port is up but blocked
■
A Red means that one or both ring ports are down.
Figure 233 shows two examples of nodes that are members of EAPS domains:
Node 1 status shows that the device is reachable, that it functions as a Master node (whose status is
Complete) in at least one domain of which it is a member, and all Domains of which it is a member are
operational. The device also has generated at least one unacknowledged Minor alarm.
Node 2 status shows that the device is currently unreachable; no alarms have been detected, and at least
one domain of which it is a member is in a transitional state. It is a Transit node, and its last status
indicated that its ring ports were up and forwarding.
Figure 233: Examples of EAPS Node showing Status
Node Actions
You can initiate a number of actions from a device node on the map.
●
Move the cursor over a node to display a small pop-up with links for the device, and for each
domain of which this node is a member:
■
Click the device link to display the Device Details display. See “The Device Details Display” on
page 471 for more information about this display.
Click the small Reports icon to the right of the device link to display the EAPS Log Report for
this device.
■
Click a domain link (left click) to show the EAPS Domain Details display for the domain. See
“The EAPS Domain Details Display” on page 467 .
■
Right click a domain link to enter Focus mode for the domain. In Focus mode, the devices and
links in the selected domain are centered and highlighted, and all other devices and links are
shown in grey. See
“Focus Mode” on page 461 for details on Focus mode.
You can also enter Focus mode by clicking the small Focus mode button ( ) to the right of the
domain link.
●
Click (left) and hold the cursor on the node to enable dragging the node around on the map.
●
Right-click to display a pop-up menu with a set of standard device-related commands. See “Right-
Click Pop-Up Menus” on page 38 for information
Node Display at Outer Zoom levels
When there are many nodes on a map that must be displayed within the Viewport, EPICenter will
automatically zoom the display out, and will represent nodes using only their status icons, rather than
the entire set of node information.
Figure 234 illustrates this.
Node 1
Node 2