manualshive.com logo in svg

Extreme Networks EPICenter 6.0, Справочное руководство

Reference Manual для продукта Extreme Networks EPICenter 6.0 доступен для скачивания бесплатно на manualshive.com. Ознакомьтесь с деталями и настройками данного программного обеспечения, используя этот manual. Скачайте его прямо сейчас и получите всю необходимую информацию для управления вашей сетью.

Поделиться
Скачать
background image

The Firmware Manager

 

EPICenter Reference Guide

182

Acknowledging the Version Changes

Once you have downloaded the software versions of interest to you, you can accept and acknowledge 
the list of software image updates: this changes any green checks in the 

Change

 column to red X’s. A 

red X indicates that the version shown in the Software Image list has not changed since the last time 
you viewed and acknowledged the list. Thereafter, green checks will appear only when you update the 
software information list and changes in the list are detected—the changed images will be indicated 
with a green check. 

Checking for Version Availability

To check for the availability of new software versions and update the list, click 

Update Software 

Information

. This queries the Extreme server and updates the list in the Software Image field. Any 

versions that have changed since you last acknowledged the update list now show a green check to 
indicate the change. 

Upgrading the Software or BootROM on Your Switches

ExtremeWare software images contains the executable code that runs on the switch and on certain 
Extreme modules that include software. An image comes pre-installed from the factory on every switch 
and on certain modules. You can upgrade this image by downloading a new version to the switch 
through the Firmware Manager. You can download the image into either the primary or secondary 
image, and specify whether the switch should be rebooted to immediately use the new image. 

The BootROM software initializes certain important switch variables during the switch or module boot 
process. 

CAUTION

If a BootROM upgrade does not complete successfully, it could prevent the switch from booting. 

EPICenter provides an Upgrade Wizard to help you select and download a new ExtremeWare software 
image or BootROM image to a device or a module.

When you perform a software image upgrade, EPICenter automatically creates a backup of your 
existing switch configuration. Switch configuration files for ExtremeWare are saved as text files in the 

<tftp_root>

\configs

 directory and configuration files for ExtremeXOS (along with Policy files, if any) 

are stored as zip files in the same location. 

<

tftp_root>

 is the location of the TFTP server, by default 

<EPICenter_install_dir>

\user.war\tftp

. See 

Chapter 5

 

“Configuration Manager”

 for more 

information on where and how configuration files are stored, and how to restore them to a device if 
necessary. 

If you specify an upgrade to an image that is several revisions newer than the image running on the 
switch, you may need to perform a 

multi-step upgrade

; upgrade to an intermediate version before you 

can upgrade to the more recent version. For “

i-

series” switches, the Upgrade Wizard evaluates the 

switch and images you have specified, and will inform you if a multi-step upgrade is required. If a 
multi-step upgrade is needed, EPICenter will inform you of the bootROM and image upgrades you 
must perform to bring the switch to the version you have specified, and will proceed to perform the 
first of those steps. 

Содержание EPICenter 6.0





































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для EPICenter 6.0

Garmin ecoRoute Owner'S Manual Supplement preview
ecoRoute
Бренд: Garmin Страницы: 8
Califone AV Tutor MCFBV1-D Specification preview
AV Tutor MCFBV1-D
Бренд: Califone Страницы: 1
McDATA OPENconnectors Command Line Interface Manual preview
OPENconnectors
Бренд: McDATA Страницы: 170
F-SECURE Mobile Anti-Virus 60 Series User Manual preview
Mobile Anti-Virus 60 Series
Бренд: F-SECURE Страницы: 90
Amazon Appointment Request Portal User Manual preview
Appointment Request Portal
Бренд: Amazon Страницы: 16
Nortel Contivity VPN Client User Manual preview
Contivity VPN Client
Бренд: Nortel Страницы: 90
FARONICS DEVICE FILTER MAC Manual preview
DEVICE FILTER MAC
Бренд: FARONICS Страницы: 30
Red Hat CLUSTER SUITE - FOR RHEL 4 Overview preview
CLUSTER SUITE - FOR RHEL 4
Бренд: Red Hat Страницы: 74
Omron SYSMAC CX-Programmer 9 Operation Manual preview
SYSMAC CX-Programmer 9
Бренд: Omron Страницы: 232
Roxio Toast 6 Titanium Getting Started Manual preview
Toast 6 Titanium
Бренд: Roxio Страницы: 132
Adaptec CDP-00276-01-A User Manual preview
CDP-00276-01-A
Бренд: Adaptec Страницы: 45
Autodesk ALIAS SURFACE Brochure preview
ALIAS SURFACE
Бренд: Autodesk Страницы: 10
MACROMEDIA FLASH MEDIA SERVER 2-SERVER-SIDE ACTIONSCRIPT... Reference preview
FLASH MEDIA SERVER 2-SERVER-SIDE ACTIONSCRIPT...
Бренд: MACROMEDIA Страницы: 234
Raining Data Corporation Raining DataCorp. mvEnterprise Installation Manual preview
Raining DataCorp. mvEnterprise
Бренд: Raining Data Corporation Страницы: 64
UNIBLUE DRIVERSCANNER 2010 - V1 Product Manual preview
DRIVERSCANNER 2010 - V1
Бренд: UNIBLUE Страницы: 12
Echo Audio Gina Owner'S Manual preview
Gina
Бренд: Echo Audio Страницы: 56
Acer RDM User Manual preview
RDM
Бренд: Acer Страницы: 4
Samsung EASYGSM GH68-60751A Owner'S Manual preview
EASYGSM GH68-60751A
Бренд: Samsung Страницы: 14

Бренды по названию

Популярные бренды

Загрузить еще бренды