Extreme Networks EPICenter 6.0, Справочное руководство

Страница: 68 / 580

The Inventory Manager
EPICenter Reference Guide
68
To see the messages related to an Add function (either successful or unsuccessful), select a device in the
list. The messages related to the device are displayed as lines under the device node, as shown in
Figure 24 .
Figure 24: Message window showing errors from the Add Device process
CAUTION
If you close the Discovery Results window without adding devices, the results for devices not already in the
EPICenter database are lost. You must perform a discovery again to regenerate information on those devices.
After the Add has finished, the Discovery Results window is re-displayed. You can select more devices,
specify a different set of Inventory Device Options, and add those devices to the Inventory Manager.
Adding Devices and Device Groups
You must have Administrator or Manager access to add devices to the EPICenter database, and create
Device Groups. If you have Monitor access only, you may not use this function.
Adding a Device
1 Click the Add button at the top of the Inventory Manager main window.
2 Select the appropriate tab to display the Basic information in the Add Device window, as shown in
Figure 25 .