Extreme Networks EPICenter 6.0, Справочное руководство

Страница: 505 / 580

Configuring QoS Policies
EPICenter Reference Guide
505
The Select Resources to be Added part of the window shows the resources currently defined in the
Grouping applet.
When you select a group in the component tree, its children (groups or individual devices) are
displayed in the associated Resource list (the right half of the Select Resources to be Added area).
You can select groups, individual devices, or individual ports as resources on which the QoS profile
should be configured. If you select a group that does not contain any devices as children, the group
is added to the Resource Results list, but will not affect the QoS profile configuration.
To view the QoS profiles currently configured on a device, use the ACL Viewer , select a device in the
component tree, and then select the QoS Profile tab to view the current device configuration.
Configuring QoS Policies
There are two ways to configure your enabled policies onto the affected devices:
Policies that are not enabled are not configured on any devices through either of these methods.
Auto Configuration
If auto configuration is enabled , any changes you make within the EPICenter software may
trigger an immediate recomputation and reconfiguration of the QoS policies on your network. When
auto-configuration is enabled, a policy reconfiguration may be triggered by any of the following events:
●
Changes to group memberships made through the Grouping Manager or Inventory Manager that
affect a group used to define a policy endpoint or policy scope
●
Network login/802.1x user login/logout
●
Changes made through the ExtremeWare CLI or ExtremeWare Vista on a device managed by the
EPICenter server
●
A user login or end station reboot when DLCS is enabled
●
Saving a change to a policy within the Policy Manager
Add Select one or more individual resources or groups from the Select Resources to be
Added list, and click this button to add them to the Resource Results list.
Add All Click this button to add all the resource children of the group you have selected
in the component tree.
Remove Select one or more resources and click this button to remove resources from the
Resource Results list.
Remove All Click this button to remove all resources from the Resource Results list.
Auto Configuration You can have the EPICenter server make configuration changes on the affected devices
any time it detects a change.
Directed Configuration You explicitly direct that configuration changes should be made by invoking the
configuration function. You can direct a configuration operation for an individual device
or for all devices.