Extreme Networks EPICenter 6.0, Справочное руководство

Страница: 336 / 580

Using the VLAN Manager
EPICenter Reference Guide
336
Figure 162: The Modify VLAN dialog, Properties and Ports page
2 Select a VLAN from the drop-down list in the VLAN Name field. (If a VLAN was selected in the
Component Tree prior to invoking the Modify VLAN function, that VLAN is pre-selected.
The current values for the VLAN are displayed.
NOTE
The Ports in VLAN list does not display SummitLink ports, because you cannot modify them.
The fields in this dialog box are as follows:
VLAN Name A drop-down list of VLANs that exists on the switches EPICenter is managing. You can
select a VLAN to modify from this list.
Protocol Filter The protocol (if any) that determines membership in the selected VLAN. This cannot be
modified.
Tag To change the tag value, type a new value into this field. The tag value can be a
number between 2 and 4095. Enter the text “untagged” to indicate that the VLAN is to
be untagged.
Available Switches The list of switches known to EPICenter. Select a switch from this list to display the
ports on the switch that are available to be included in the VLAN. (If a protocol other
than “ANY” is selected, only switches that support the assigning of the protocol to a
VLAN are included in the list.)
Available Ports Displays ports for the currently selected switch.
Ports in VLAN Displays the ports in the currently selected VLAN switch.
Tagged button Click Tagged to add the port as a tagged port. If this is an untagged VLAN, you are not
allowed to add a tagged port.
Untagged button Click Untagged to add the port as an untagged port.
Remove button Select the port from the Ports in VLAN list, and click Remove to remove a port from the
VLAN.
Connect Device button After you add a device and port to the VLAN, you can use the Connect Device button to
determine whether that port can connect to the other members of the VLAN.
•