Extreme Networks EPICenter 6.0, Справочное руководство

Страница: 380 / 580

EPICenter Reports
EPICenter Reference Guide
380
In other reports, you select a column name, then a comparison operator, and then the value to be used
for comparison. In these reports you may often concatenate two conditional statements with a logical
operator (
and or or )
The Alarm Log report is an example of this type of filter specification, as shown in Figure 180 .
Figure 180: Report filter specification for logs
The comparison operators you can use are:
If the column values are strings, the comparisons are taken to indicate alphabetic order, where “greater
than” specifies a letter that occurs later in the alphabet (for example, the letter B is greater than A), or
later in alphabetical order (“Mary” is greater than “Joe”; “Mary” is also greater than “Many”).
NOTE
You can use the browser Copy and Paste functions to copy a specific value from the current report into the
comparison field.
To use a second condition to your filter, choose one of the logical operators And or Or .
If you do not want to include a second condition, do not select any values for those fields.
With either type of filter specification, click Submit to run the filter. Click Reset to return the filter to its
default values.
> (greater than)
< (less than)
<= (greater than or equal)
>= (less than or equal)
!= (not equal)
= (equal)
starts with
ends with
contains
And Include a row in the report only if both conditions are true.
Or Include the row if either one (or both) of the conditions are true.