Extreme Networks EPICenter 6.0, Справочное руководство

Страница: 95 / 580

The Properties Display
EPICenter Reference Guide
95
The Wireless Tab
If this module supports wireless ports (either direct or remote connect ports) the Wireless tab displays
information on the selected wireless port and interfaces. The tab is divided into three subtabs: Wireless
Ports , Physical Wireless Interfaces , and Virtual Wireless Interfaces .
Under the Wireless Ports tab, the following information is shown for each port:
Under the Physical Wireless Interfaces tab, the following information is shown for the interfaces on the
each port:
Under the Virtual Wireless Interfaces tab, the following information is shown for the interfaces on the
each port:
MAC Address The MAC address of the user’s host.
VLAN The VLAN to which the port belongs.
Port The port number. If this is a remote connect port (virtual port) the port number will be
preceded by a “v” for example, v.1, v.2 and so on.
State The state of the wireless port: Disabled, Enabled, Online, or Error
Num. Interfaces The number of physical interfaces associated with this port.
Location Physical location of the wireless port as configured by the administrator
BootROM Version The BootROM version running on the device connected to this port
S/W Version The version of the software running on the device connected to this port
Description A description of the device connected to this port
Product Name The product name of the device connected to this port
Serial Number The serial number of the device connected to this port
Country Code The Country Code associated with the device connected to this port, which determines
country-dependent frequency and other regulatory settings on the wireless port, shared by all
wireless ports on the switch
Antenna Type The type of antenna on the device connected to this port, e.g. Integrated or detachable
Antenna Location The physical location of the antenna (Indoor, Outdoor)
Interface Wireless interface identifier. A remote connect (virtual) interface is indicated by a “v”
preceding the interface identifier, for example v.1.1.1, v.1.1.2, and so on.
802.11 Mode Wireless LAN RF mode: 802.11a, 802.11b, or 802.11g/b
RF Channel Radio frequency channel used by the interface
RF Profile Radio frequency profile configured for or assigned to this interface. See the section on
configuring RF properties in the
Summit 300-48 Switch Software User Guide .
Interface Wireless interface identifier. A remote connect (virtual) interface is indicated by a “v”
preceding the interface identifier, for example v.1.1.1, v.1.1.2, and so on.
State Interface state (Active or Inactive)
ESS The ESS name (the name of the wireless network associated with the security profile)
Security Profile Security profile configured for this interface; see the section on CLI commands for security on
the switch in the
Summit 300-48 Switch Software User Guide
802.11 Auth 802.11 authentication method for this wireless interface: all, open, or shared
Network Auth Network authentication method: all methods, none, Net Login, Mac RADIUS, 802.11x, WPA
or WPA/PSK