Extreme Networks EPICenter 6.0, Справочное руководство

Страница: 496 / 580

Using the Policy Manager
EPICenter Reference Guide
496
only for a Security or an IP Policy endpoint. Note that these extra buttons only appear for the Network
Resources (left-hand) side for Security policies. If you are creating a VLAN or Source Physical Port
policy, these two buttons will not be present.
Figure 259: Edit Policy Endpoints window for a Security policy
The left side of this window (see Figure 259 ) Select Endpoints to be Added , displays the component
tree showing the resources currently defined in the Grouping applet. You can specify endpoints using
any of the available high-level resources: Users, hosts, custom applications, devices, VLANs, or groups
of these resources. The types you can select will depend on the type of policy you are creating.
The area on the right of the window (see Figure 259 ) Current Policy Endpoints , shows the resources
that are already selected as endpoints.
When you select a group in the component tree, its children (groups or individual resources) are
displayed in the associated Resource list (the right half of the
Select Endpoints to be Added area).
Individual resources are displayed only if they are of types that can be used as endpoints for the policy
type you have selected. For example, if you are creating a VLAN policy, the
Select Endpoints to be
Added list will only display groups and VLAN resources.
The standard buttons at the center of the window allow you to do the following:
Add Select one or more individual resources or groups from the Resources list, and click
the
Add button to add them to the Current Policy Endpoints list.
Add All Click the Add All button to add all the resource children of the group you have selected
in the component tree.
Remove To remove resources from the Current Policy Endpoints list, select one or more
resources and click the
Remove button.
Remove All To remove all resources from the Current Policy Endpoints list, click the Remove All
button.