Extreme Networks EPICenter 6.0 Скачать руководство пользователя страница 521 | Manualshive

Страница: 521 / 580

background image

Source Port QoS Display

EPICenter Reference Guide

521

Policy Rule Comparison

The Source Port QoS policy rule comparison display shows both the Ideal rules, as generated by the
EPICenter Policy Manager (shown in the left half of the table) and the Configured Rules as they exist on
the device, shown in the right half of the table.

The rows in the comparison display are displayed in colors that indicate the status of the rule:

The columns in the display show information as follows:

View Policy Rules

The Policy Rules display shows details of the Ideal Source Port QoS rules, as generated by the
EPICenter Policy Manager. The information in this display is as follows:

View policy rules

Select to display the EPICenter rules only.

View configured rules

Select to display the configured rules only.

Green

The rule is a valid rule (is not in conflict with a rule already on the device), but that it
has not been configured on the device. Only the Ideal side of the table is filled in for
these rules.

White

The rule is valid, and has been configured on the device. Both the Ideal and Configured
sides of the table are filled in.

Yellow

The EPICenter-generated “ideal” rule conflicts with a rule already configured on the
device. Two rules conflict when the traffic patterns for the rule are the same but the
specified treatment (the QoS profile) is different. Both the Ideal and Configured sides of
the table are filled in.

Blue

The rule is configured on the device, but it was not generated by the EPICenter Policy
Manager. Only the Configured side of the table is filled in for these rules.

!

(exclamation point)

An empty column used to invoke a sort by policy precedence. Clicking the column
header will sort the policies in policy precedence order.

Policy

Displays the name of the policy.

Ideal Source Port

Displays the name of the device and the port specified by this policy.

Ideal Profile

Indicates the QoS profile specified for port by this policy.

Config Source Port

The device and port to which the QoS rule applies.

Config Rule Profile

The QoS profile that applies to this port.

!

(exclamation point)

An empty column used to invoke a sort by policy precedence. Clicking the column
header will sort the policies in policy precedence order.

Policy

Displays the name of the policy.

Source Port

The device and port specified by this policy.

Profile

The QoS profile that is specified for this VLAN by this policy.

To be used

Indicates whether the rule is acceptable for configuration on the device (not in conflict
with any other rules). Values for this column are:

• Yes, the rule can be used.

• No (duplicated) indicating that the rule duplicates another rule.

• No (disabled) indicating that the policy is disabled.

«
...
519
520
521
522
523
...
»

Содержание EPICenter 6.0





































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для EPICenter 6.0

Бренд: QMS Страницы: 118

Lazett Combo SCX-4116

Бренд: Samsung Страницы: 165

ML 1630 - B/W Laser Printer

Бренд: Samsung Страницы: 18

Afro-Cuban Percussion

Бренд: M-Audio Страницы: 5

8.5 ANTI-VIRUS - LINUX-FREEBSD REV 85.2

Бренд: AVG Страницы: 234

DISK DIRECTOR SUITE 10

Бренд: ACRONIS Страницы: 127

LIVE CYCLE 7.2 - INSTALLING AND CONFIGURING LIVECYCLE FOR JBOSS

Бренд: Adobe Страницы: 90

EliteBook 8460W

Бренд: HP Страницы: 41

Elite 7300 Microtower

Бренд: HP Страницы: 4

MultiSeat ms6000

Бренд: HP Страницы: 63

EliteBook 8560p

Бренд: HP Страницы: 4

Elitebook 8560W

Бренд: HP Страницы: 74

Fabric OS 7.0.0

Бренд: HP Страницы: 138

Бренд: HP Страницы: 50

EliteBook 2560p

Бренд: HP Страницы: 34

Бренд: HP Страницы: 102

Бренд: HP Страницы: 16

Evo D300 - Convertible Minitower

Бренд: HP Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды