Extreme Networks EPICenter 6.0, Справочное руководство

Страница: 437 / 580

Wireless Reports
EPICenter Reference Guide
437
You can use the Wireless client time-out length (seconds) field to specify a minimum connection time, to
exclude cases in which a roaming client might be changing from one interface to another. Normally, this
time is the same as the client age-out setting on the switch.
This report displays the following information:
Click on an entry in the Device column to open the Device Details report; see the “Device Details
Report” on page 387 . Click on an entry in the Interface column to open the Wireless Port Details report;
see the information on page 423 .
Unconnected Client Report
The Unconnected Client Report helps diagnose why a client cannot connect to the network by listing
clients not currently in the data forwarding state. This report can also show any client trying to access
your network maliciously.
When a client is roaming from one interface to another, it shows on the new interface temporarily as not
connected. However, the client may not truly be in the unconnected state, because it may still be
connected on the old interface. It should be considered an unconnected client only if it is unconnected
for longer than the wireless client time-out interval, which you can specify for this report.
To view a summary of clients that are not in the data forwarding state, click the Wireless Reports link
in the left-hand panel, and then click the Unconnected Clients link. Figure 226 shows example output.
Client MAC MAC address of the client
User Name User name that the client is using to connect to interface; a value appears here only if
the authentication method is 802.1
x
Authentication Method Authentication method that client is using to access the network: Open, WEP, MAC,
802.1
x , PSK, none, or all authentications
Encryption Method Encryption method used by this client: WEP64, WEP128, TKIP, AES, None, or
unknown
Device Name and IP address of the device reporting this client
Interface Wireless interface reporting this client
WP Location Physical location of the wireless port