Extreme Networks EPICenter 6.0, Справочное руководство

Страница: 449 / 580

EPICenter Reference Guide
449
16 EAPS Protocol Monitoring and Verification
This chapter describes the following:
●
EAPS Monitor Main View on page 452
●
The EAPS Map on page 454
●
Node Status on page 456
●
Link Status on page 459
●
Reorganizing the Map View on page 459
●
The Tools Menu on page 462
●
The Domains Tab on page 465
●
The Devices Tab on page 469
●
The Links Tab on page 475
●
EAPS Log Reports on page 478
Overview of the EAPS Monitor
The Ethernet Automatic Protection Switching (EAPS) Monitor provides a visual way to view the status
of your EAPS configurations (EAPS domains) and to verify the configuration of your EAPS-enabled
devices. With its multiple status displays and the ability to focus on individual EAPS domains, it can
also help you debug EAPS problems on your network.
As with the EPICenter Topology Manager, the EAPS Monitor map is discovered and populated
automatically.
NOTE
Your devices must be running ExtremeWare 7.7 or later, or ExtremeXOS 11.3 or later in order to be recognized by
EPICenter as EAPS nodes. ExtremeXOS 11.6 is required for full functionality within EPICenter.
EAPS Monitor Functions
There are multiple ways to invoke the functions provided by the EAPS Monitor:
●
Using the menus at the top of the main applet frame
●
Using the three tabs shown directly below the EAPS Monitor menus
●
Using commands that appear on the Viewport Toolbar (the map toolbar)
●
Using commands from a pop-up menu that appears when you right-click on a device node shown
on the EAPS map
●
Using commands from a pop-up menu that appears when you right-click on the map background