Extreme Networks EPICenter 6.0, Справочное руководство

Страница: 205 / 580

The Macro Player
EPICenter Reference Guide
205
The Macro Results Window
During the execution of a macro, the macro results are shown in a Message dialog similar to the dialogs
used for other configuration actions. However, instead of showing the results in a tree structure, this
dialog show the results in a tabular form, as shown in
Figure 97 .
Figure 97: The Macro Results dialog
If the macro was played on multiple devices, each device is shown in a separate row. The columns are:
●
To change the number of lines shown in the Messages column, use the
Number of lines to display
in table
drop-down field at the top of the window. The Results display can show up to 10 lines in
each Messages cell.
To see more complete results for an individual device, select the row in the table, and the output for
that device appears in the area below the results table.
●
To stop the execution of a macro on a device, select the row in the table and click
Stop
. When
execution has been halted, a system message will appear, and a red stop-sign icon indicates that
execution has been stopped.
Device The name of the device on which the macro is executing
IP Address The IP address of the device
(blank) The progress of the macro. This displays the spinning clock icon while execution is in
progress, and changes to successful (green check), failed (red X) or stopped (red stop-
sign) upon completion.
Messages The output from the macro for each device. Each Messages cell is actually a scrolling
display that displays the output from the macro as execution occurs. By default displays
the last three lines of the macro output.
Output from selected device