Extreme Networks EPICenter 6.0, Справочное руководство

Страница: 504 / 580

Using the Policy Manager
EPICenter Reference Guide
504
The fields in this window are as follows:
To modify the settings or device scope of a QoS profile, follow these steps:
1 Select the profile you want to modify from the drop-down menu.
The default definitions for the eight QoS profiles you can configure are shown in Table 57 .
NOTE
For devices running older versions of ExtremeWare (prior to 6.x) only four QoS profiles (QP1-QP4) are supported.
Their priorities are low, normal, medium, and high. If you select a profile that is not supported on the device you
are configuring, the profile will not be configured on the device.
2 To change the minimum bandwidth for the profile, type a value into the Min Bandwidth field. The
value must be between 0 and 89, and less than or equal to the value you plan to use for maximum
bandwidth.
NOTE
The sum of all minimum bandwidth cannot be greater than 90%.
3 To change the maximum bandwidth for the profile, type a value into the Max Bandwidth field. The
value must be between 0 and 100, and greater than or equal to the minimum bandwidth specified in
the previous field.
4 To change the priority, select one of the eight priorities (low, lowHi, normal, normalHi, medium,
mediumHi, high, highHi, or deny) from the drop-down menu in the
Priority field.
5 To specify the devices or ports on which this modified profile should be configured, select devices or
groups from the
Select Resources to be Added part of the window, and move them to the Resource
Results list.
QoS Profile Select a QoS profile from this drop-down menu.
Min Bandwidth Use this field to change the minimum bandwidth for the profile, by typing in a value
between 0 and 89, and less than or equal to the value you plan to use for maximum
bandwidth. The sum of all minimum bandwidth cannot be greater than 90%.
Max Bandwidth Use this field to change the maximum bandwidth for the profile, by typing in a value
between 0 and 100, and greater than or equal to the minimum bandwidth specified in
the previous field.
Priority Select one of the eight priorities (low, lowHi, normal, normalHi, medium, mediumHi,
high, highHi, or deny).
Table 57: Default QoS Profile Settings
QoS Treatment Name Priority Min Bandwidth Max Bandwidth
QP1 low 0 100%
QP2 lowHi 0% 100%
QP3 normal 0% 100%
QP4 normalHi 0% 100%
QP5 medium 0% 100%
QP6 mediumHi 0% 100%
QP7 high 0% 100%
QP8 highHi 0% 100%