Extreme Networks EPICenter 6.0, Справочное руководство

Страница: 501 / 580

Deleting a Policy
EPICenter Reference Guide
501
7 To modify the list of endpoints for any of the policy types, click the Edit... button that appears either
to the right or below the list of endpoint resources.
This displays the Edit Policy Endpoints Window discussed in detail on page 495 .
●
Add resources to or remove them from the Current Policy Endpoints list. See “Edit Policy
Endpoints Window” on page 495 for more detailed information about this window.
●
Click the OK button to closes the Edit window and displays the modified contents of the Current
Policy Endpoints list in the appropriate resource list in the Policy Traffic area.
●
Click Cancel to close the Edit window and abandon any changes you have made to the Current
Policy Endpoints list.
8 To modify the access domain or policy scope click the Edit... button to the right of the Policy Scope
resource list. The Edit Policy Access Domain/Policy Scope Window is displayed. This window is
discussed in detail in “Edit Policy Endpoints Window” on page 495 .
The left side of this window ( Select Network Resource Endpoint(s) to be Added ) displays the
resources currently defined in the Grouping applet.
●
Add resources to or remove them from the Current Policy Scope Resources List. See “Edit Policy
Access Domain/Policy Scope Window” on page 497 for more information.
●
Modify the QoS Profile that should be configured on the device for this policy by selecting a
resource in the
Current Policy Scope Resources list, and then selecting a profile from the drop-
down list associated with that resource.
●
Click OK to close the Edit window and display the contents of the Current Policy Endpoints list
in the appropriate resource list in the Policy Traffic area.
●
Cancel closes the Edit window and abandons any changes you have made to the Current Policy
Endpoints list.
●
To change the precedence of an entry in the Policy Scope resources list, select the entry and use
the
Up or Down buttons to move it in the list. Moving it up will give it higher precedence;
moving it lower will reduce its precedence.
The order in which the resources are displayed in the Policy Scope Resource list determines their
precedence. If individual device appears more than once in the list (as a member of multiple
groups, for example) and the QoS profile setting of each of those occurrences is in conflict, the
first occurrence of the device in the list will determine which profile will be used.
9 To save your modified policy definition, click the Save button.
If you attempt to leave the policy definition page without saving your changed, a small Confirm
Save Policy Changes pop-up appears, asking if you want to save the changes.
●
Click Yes to save your changes.
●
Click No to abandon your changes.
●
Click Cancel to return to the Policy Definition page of the policy you were modifying.
Deleting a Policy
Use the Delete policy button to delete the currently selected policy. A pop-up window appears
asking for confirmation of the deletion.
Click Yes to proceed with the deletion, or No to cancel the operation.