Extreme Networks EPICenter 6.0, Справочное руководство

Страница: 339 / 580

Adding and Deleting Protocol Filters
EPICenter Reference Guide
339
Figure 164: Modify Membership of VLAN window
3 To add a port to the VLAN, first select the switch in the Component Tree on the left. The Resource
Table displays a list of ports on the selected switch that are available to be included in the VLAN.
NOTE
The list of port resources does not include ports configured as slave load sharing ports.
4 Select one or more ports from the port resources list.
5
Click
Add Tagged
to add the port as a tagged port. Click
Add Untagged
to add the port as an
untagged port.
If this is an untagged VLAN, you cannot add a tagged port. The tagged button will be grayed out in
this case.
NOTE
If you add a port untagged, EPICenter automatically removes it from any other VLAN that includes the port as an
untagged member and that uses the same protocol as the VLAN to which you are adding the port.
6 To remove ports from the VLAN, select one or more ports in the Current VLAN Port Members list,
and click Remove .
7 To remove all ports from the VLAN, click Remove All .
8 When you are finished making changes, click OK . To cancel all changes, click Cancel .
Adding and Deleting Protocol Filters
Users with Administrator or Manager access can view, add, and delete protocol filter definitions. If you
have Monitor access, you can view filter definitions, but not add or delete them.