Acer AO533 Скачать руководство пользователя страница 1

Страница: 1 / 4

Page 1 of 4

Pre-Install Intel® AHCI Driver for
Windows XP® Operating System

Pre-Installation Using the F6 Method

Notes:

Before you start to install Microsoft® Windows XP® operating system, you will need an

optical drive, a USB floppy disk drive, a blank 1.44MB floppy diskette, and Microsoft®

Windows XP® Professional/Home Edition Setup Disc (bootable).

Extract AHCI F6 driver files to a blank 1.44MB floppy diskette. Make sure the following files are

contained in the root directory:

Connect the USB floppy drive and then boot up from the Microsoft® Windows XP®

Professional/Home Edition Setup Disc to install operating system.

Содержание AO533

Страница 1: ...drive a USB floppy disk drive a blank 1 44MB floppy diskette and Microsoft Windows XP Professional Home Edition Setup Disc bootable 1 Extract AHCI F6 driver files to a blank 1 44MB floppy diskette Ma...

Страница 2: ...Page 2 of 4 3 At the beginning of the operating system installation press F6 to install a third party SCSI or RAID driver 4 When prompted select S to Specify Additional Device...

Страница 3: ...tte you created in step 1 6 At this point you should be presented with a selection for one of the following controllers listed depending on your hardware version and configuration for AHCI Controllers...

Страница 4: ...ropriate for the hardware in your system and press Enter 8 Press Enter again to continue Leave the floppy diskette in the system until the next reboot as the software will need to be copied from the f...