Draytek VigorBX 2000 Series Скачать руководство пользователя

Страница: 412 / 777

VigorBX 2000 Series User’s Guide

400

Protocol -

Specify the protocol(s) which this filter rule will

apply to.

Source/Destination Port –

(=)

– when the first and last value are the same, it indicates

one port; when the first and last values are different, it
indicates a range for the port and available for this service

type.

(!=)

– when the first and last value are the same,

indicates all the ports except the port defined
here; when the first and

last values are different, it

indicates that all the ports except the range defined here are
available for this service type.

(>)

–

the port number greater than this value is available.

(<)

–

the port number less than this value is available for this

profile.

Service Group/Object

- Use the drop down list to choose the

one that you want.

Fragments

Specify the action for fragmented packets. And it is used for

Data Filter

only.

Don’t care -

No action will be taken towards fragmented

packets.

Unfragmented -

Apply the rule to unfragmented packets.

Fragmented -

Apply the rule to fragmented packets.

Too Short -

Apply the rule only to packets that are too short

to contain a complete header.

Filter

Specifies the action to be taken when packets match the

rule.

Block Immediately -

Packets matching the rule will be

dropped immediately.

Pass Immediately -

Packets matching the rule will be passed

immediately.

Block If No Further Match -

A packet matching the rule, and

that does not match further rules, will be dropped.

Pass If No Further Match -

A packet matching the rule, and

that does not match further rules, will be passed through.

Branch to other Filter Set

If the packet matches the filter rule, the next filter rule will
branch to the specified filter set. Select next filter rule to

branch from the drop-down menu. Be aware that the router
will apply the specified filter rule for ever and will not return

to previous filter rule any more.

Sessions Control

The number typed here is the total sessions of the packets
that do not match the filter rule configured in this page. The
default setting is 60000.

MAC Bind IP

Strict

–

Make the MAC address and IP address settings

configured in

IP Object

for

Source IP

and

Destination IP

are

bound for applying such filter rule.

No-Strict -

no limitation.

Quality of Service

Choose one of the QoS rules to be applied as firewall rule.
For detailed information of setting QoS, please refer to the

Содержание VigorBX 2000 Series










































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание VigorBX 2000 Series

Отзывы:

Похожие инструкции для VigorBX 2000 Series

Бренды по названию

Популярные бренды

Draytek VigorBX 2000 Series, Руководство пользователя

Результаты поиска

Содержание VigorBX 2000 Series

Отзывы:

Похожие инструкции для VigorBX 2000 Series

Бренды по названию

Популярные бренды