manualshive.com logo in svg

Dräger Infinity Vista, Инструкция по эксплуатации, Страница: 78 / 280

Поделиться
Скачать
Dräger Infinity Vista Скачать руководство пользователя страница 78

4-12

Infinity Vista

VF6

4 A

DMISSION

/D

ISCHARGE

/T

RANSFER

During data transfer, the monitor displays the message ‘

Wait’

 in the Status field or an 

error message, if copying cannot be initiated (i.e. card is not fully inserted). If the copy 
was successful, the monitor time stamps the card and displays the message 

’Card data 

copy complete’

; otherwise,

 

the monitor displays the error message 

’Card data copy 

unsuccessful’

. Using an invalid memory card (i.e., a software card) produces the 

message 

’Card Contents Invalid’

 together with an error tone, and copy to card is not 

possible.

STEPS: Copy to Monitor

1. Insert the memory card into the memory card slot on the right side of the 

destination monitor.

2. Press the 

Menu

 fixed key.

3. Click on 

Admit/Discharge

.

4. Click on 

Copy Data

.

5. Click on 

Copy to Monitor

. The Copy to Monitor menu appears with the 

patient Name, ID and Status in the corresponding fields.

CAUTION:

z

Copying data from a card to a monitor overwrites (not appends) all data 
currently stored in the monitor.

z

After it has copied all the data from a card, the monitor erases data stored on 
the card.

Содержание Infinity Vista

























































































































































































































































































Отзывы:

Нет отзывов