Dräger Infinity Vista Скачать руководство пользователя страница 138

Страница: 138 / 280

8-8

Infinity Vista

VF6

8 ECG

AND

EART

ATE

Lead Selection and Display Amplitude

Select the lead(s) that provides the clearest and most informative electrocardiogram
for your patient. The

Size

selection lets you modify the amplitude of the displayed

ECG for optimum viewing. The available ECG sizes are:

0.25, 0.5, 1, 2, 4, and 8 mV/cm.

STEPS: Selecting the Lead and Size

1. Click on the waveform channel where the ECG waveform is currently

displayed.

2. Click on

Waveform

3. Select the desired ECG lead and click the knob.

4. Click on

Size

5. Select the desired display amplitude and click the knob.

NOTE:

The lead assigned to the first waveform channel cannot be assigned to the
second waveform channel, except in Cascade mode.

If you change the monitor’s leads and the central station is storing waveforms
selected manually (Auto Track OFF), you must also change the leads at the
central station. For more information, see the Instructions for Use of the central
station.

Содержание Infinity Vista

























































































































































































































































































Результаты поиска

Содержание Infinity Vista

Отзывы:

Dräger Infinity Vista, Инструкция по эксплуатации, Страница: 138 / 280

Результаты поиска

Содержание Infinity Vista

Отзывы: