manualshive.com logo in svg

Dräger Infinity Vista, Инструкция по эксплуатации, Страница: 48 / 280

Поделиться
Скачать
Dräger Infinity Vista Скачать руководство пользователя страница 48

2-6

Infinity Vista

VF6

2 M

ONITOR

 S

ETUP

5. Insert the left side of the battery door into the hinges, and swivel the door 

closed until the locking tab snaps into place.

6. Press the 

Power

 fixed key to turn the monitor on. The green light indicator in 

the key should light up.

7. Wait until the end of the self-tests and verify that the battery gauge appears at 

the bottom of the display.

 To prolong battery life, we recommend the following:

z

Use the AC adapter whenever possible.

z

Keep the battery charged.

STEPS: Charging the Battery with the Monitor

The battery that is delivered with a new monitor needs to be fully charged before 
monitoring. When connected to line power via the AC Adapter, the monitor 
automatically charges the battery and the green Battery Charger LED lights up (the 
monitor can be turned on or off).

To charge the battery:

1. Connect the monitor to line power and let the lead acid battery charge for 5½ 

hours, the lithium ion battery for 8 hours. (The 

Battery Charging

 message 

appears intermittently.)

2. Wait until the battery is fully charged before monitoring a patient. (The 

Battery Charging

 message no longer appears.)

NOTE:

The battery gauge appears only when you operate the monitor on battery 

power.

NOTE:

If the battery does not charge properly, the message 

Battery Charger Error

 

appears. Contact your Biomedical technician to replace the battery.

Содержание Infinity Vista

























































































































































































































































































Отзывы:

Нет отзывов