Dionex UltiMate 3000 Series, Руководство по эксплуатации

Страница: 137 / 236

UltiMate 3000 Series:
SD, RS, and BM Pumps
Operating Instructions Page 123
7 Service
7.1 General Notes
The following sections describe all service and repair procedures for the pump that the user
may perform. All other maintenance and service procedures must be performed by Dionex
personnel.
Observe the following precautions:

Observe all warning notes when carrying out maintenance or repair work.

Keep in mind that the fluid components of the pump may be filled with toxic solvents.
Before starting maintenance or repair procedures, rinse toxic solvents from the instrument
and put on protective clothing.

ISO-3100 and HPG-3200
When the fluid components of the pump are filled with liquid and the solvent reservoirs
are located above the pump outlet during pump operation, the hydrostatic pressure in the
system may cause eluent to escape when you open a fluid connection in the pump.
Therefore,
before you open a fluid connection, position the reservoirs below the
connection to be opened.

Use original Dionex spare parts only. Substituting non-Dionex parts or using non-Dionex
accessories may impair the performance of the pump, thereby voiding the product
warranty. For more information, see the warranty statement in the terms of sale.

Before returning any instrument to Dionex for repair, contact Dionex Service or your
local distributor. An RMA (Return Material Authorization) number is required to track
your instrument. Always use the original packaging and observe the packing instructions
when shipping the pump. Shipping the pump in anything other than the original
packaging voids the warranty. For more information, see the warranty statement in the
terms of sale.
For instructions on shutting down the pump, see page 97.
Tip: Do not forget to test the pump for leakage after you have carried out
maintenance or repair work on the fluid connections (

page 154).