Dionex UltiMate 3000 Series, Руководство по эксплуатации

Страница: 79 / 236

UltiMate 3000 Series:
SD, RS, and BM Pumps
Operating Instructions Page 65
When the pump is correctly connected to Chromeleon:

The Connected LED on the front panel is green.

Front panel input is disabled.

Functions for estimating the lifetime of consumables and monitoring and recording
service and (re)qualification information are provided (

page 91).

The Standby button on the front panel remains active.
Before turning off the pump by the main power switch, always disconnect the module in
Chromeleon.
5.3.2 Direct Control
With direct control, you select operating parameters and commands in the Commands
(F8) dialog box. Direct commands are executed as soon as they are entered. For routine
operation, most parameters and commands are available also on a control panel.
To open the Commands dialog box for the pump
1. Open a control panel (any panel is possible). To open a control panel, open the
Chromeleon Browser and double-click a control panel in the Dionex Templates/Panels
folder.
2. Connect the control panel to the timebase in which the pump is installed. On the
Control menu, select Connect to Timebase , and then select the timebase on the
Timebase tab. For information about the Timebase dialog, click Help .
Tip: The Control menu is visible only when a control panel is already open.
3. Press the F8 key or select Command on the Control menu.
4. To see the parameters and commands that are available for the pump, click the plus
sign next to
PumpModule . Here you see

General pump properties and commands, such as, Connect, Connected, Disconnected,
LeakSensorMode, and Degasser.

Specific groups of properties and commands (listed under the Pump Device name
specified during the configuration of the pump (

page 37)), for example, the flow-
related properties and commands.