Dionex UltiMate 3000 Series, Руководство по эксплуатации

Страница: 82 / 236

UltiMate 3000 Series:
SD, RS, and BM Pumps
Page 68 Operating Instructions
5.3.3 Automated Control
With automated control, you create a program file (PGM) for automated operation of the
pump. Programs can be created automatically with the help of a software wizard or
manually by editing an existing program. In addition to programs for sample analysis, you
can also create programs for special purposes, for example, to automate system shutdown
(

page 98) or to ensure that the system automatically restarts operation as desired after a
power failure. For details, see the Chromeleon Help.
To create a program with the Program Wizard
1. Open the Program Wizard. On the File menu, select New , and then select Program
File .
2. The wizard guides you through program creation. On each wizard page, make the
desired settings or accept the default values. For additional information about a page,
click Help.
3. After you finish the wizard, Chromeleon automatically creates the corresponding
program.
4. To start the program, follow the steps on page 69.
To create a program manually
1. Open an existing program.
Select and double-click the program you want to open. —or—
On the File menu, select Open . In the dialog box, select Program on the Object of Type
list and select the program.
Fig. 24: Chromeleon program (here program shown in the Commands view)
Open the
Device Views
Opens the
Commands View