Dionex UltiMate 3000 Series, Руководство по эксплуатации

Страница: 106 / 236

UltiMate 3000 Series:
SD, RS, and BM Pumps
Page 92 Operating Instructions
After you have … Perform the following command …
Replaced the entire pump head assembly CheckValveServiceDone
1
, PistonsChanged
1
,
SealChanged
1
, SupportRingChanged
1
Replaced a support ring SupportRingChanged
1
Serviced the pump (for example, annual maintenance) ServiceDone
3
Performed instrument qualification QualificationDone
3
1 Listed in the Commands dialog box under PumpModule > [Pump Device Name]_Wellness_LeftBlock
and/or PumpModule > [Pump Device Name]_Wellness_RightBlock
2 Listed in the Commands dialog box under PumpModule > [Pump Device Name]_Wellness
3
Listed in the Commands dialog box under PumpModule_Wellness
For information about the [Pump Device Name], see page 37.
These commands reset the related counters and update the information when the action
was performed.
Control Panel
On the control panel for the pump, click Wellness , Qualification , and Service to see the
related predictive performance commands and parameters on separate panels. On these panels,
you can enter the limits and reset the counters. In addition, wellness bars provide visual
indicators of qualification and service periods. The color-coding of the wellness bars provides
information about the status:
Color Description
Green OK.
Yellow
The value will soon reach the specified limit and/or the related component needs servicing
or should be replaced soon.
Orange (Only for monitoring Qualification properties.) The value has reached the specified limit.
However, a Grace Period has been specified during which the pump may still be operated.
Rot The value has reached the specified limit or the specified grace period has expired.
Replacement of a component, servicing, or qualification of the pump is overdue. The pump
can no longer be operated; besides, it is not possible to start a batch.
In addition, a message appears in the Chromeleon Audit Trail when a limit has been
reached.