Dionex UltiMate 3000 Series, Руководство по эксплуатации

Страница: 112 / 236

UltiMate 3000 Series:
SD, RS, and BM Pumps
Page 98 Operating Instructions
Standby Program
A standby program sets the HPLC system into standby mode. The application can be
reactivated very quickly afterward. The main program steps are:

The pump flow is automatically reduced at the end of the program.

The temperature of all temperature-controlled modules in the system is reduced.
Shutdown Program
A shutdown program automates shutdown of the HPLC system. The main program steps are:

The pump flow is automatically stopped at the end of the program.

Certain system components and functions are turned off (for example, detector lamps,
temperature control).
To create a standby or shutdown program
Select one of the following alternatives:

Select and perform the operating commands and parameters from the Commands dialog
box (

page 65).

Create and run a corresponding program to automate the process (

page 68).

Use the SmartShutdown Wizard to create and run the program (see the next section).
To create the program with the SmartShutdown wizard
1. To open the wizard, click SmartShutdown on the Batch menu.
2. Follow the instructions as they appear on each page of the wizard. For additional
information about a page, click
Help .
3. After you finish the wizard, Chromeleon

Creates the program and saves it in the timebase for which you create the program.

Opens the Start Batch on dialog box.
Select the program and click Start to run the program.
For more information about the SmartShutdown wizard, see the Chromeleon Help.