Dionex UltiMate 3000 Series, Руководство по эксплуатации

Страница: 110 / 236

UltiMate 3000 Series:
SD, RS, and BM Pumps
Page 96 Operating Instructions
5.6.5 Using the Digital Inputs and Outputs (Digital I/O)
Before you begin, verify that

The device you want to control is connected to the digital I/O port on the rear panel of the
pump (

page 31) and that the appropriate signal cable (6-pin Mini-DIN, part no.
6000.1004) is used for the connection.

The relay outputs and digital inputs you want to use are selected in the Properties dialog
for the pump (

page 41).
When these conditions are fulfilled, the relay outputs and digital inputs are available in
Chromeleon, for example, in the Commands dialog box for the pump, and can be programmed
as required. For information about the functions of the connector pins and pin assignment, see
page 215.
5.6.6 Operational Qualification and Performance Qualification
Operational Qualification and Performance Qualification allow you to check and document
the performance of the HPLC system. All materials required for performing qualification
and detailed instructions are available from Dionex on request.