Dionex UltiMate 3000 Series, Руководство по эксплуатации

Страница: 101 / 236

UltiMate 3000 Series:
SD, RS, and BM Pumps
Operating Instructions Page 87
5.5.9 Adjusting the Screen Brightness or Contrast
You can adjust the screen brightness or screen contrast to your requirements from
Chromeleon or on the pump display. To do so, select one of the following alternatives:

In Chromeleon, open the Commands dialog box for the pump. Change the screen
brightness under Brightness and/or the screen contrast under Contrast .

On the pump display, select the Configuration menu (

page 76) and select Display &
soft keys . Select Brightness and adapt the value for the screen brightness and/or select
Contrast and adapt the value for the screen contrast as required.
5.5.10 SmartStartup and SmartShutdown
The SmartStartup wizard assists you in automating regular routine tasks (

page 58).
With SmartStartup, the different modules of the UltiMate 3000 system are turned on
automatically and in a controlled manner. For example, SmartStartup can purge the pump
of the HPLC system automatically, flush the column, and perform system equilibration.
Important module parameters, such as the pressure pulsation of the pump, are monitored.
When the modules operate within the specified limits, the sample sequence, which was set
up before, can be started automatically. SmartStartup can be used at any time.
If you have to interrupt system operation, use the SmartShutdown wizard to create a program
to set the HPLC system into standby mode or to automate shutdown of the system
(

page 98).