Dionex UltiMate 3000 Series, Руководство по эксплуатации

Страница: 201 / 236

UltiMate 3000 Series:
SD, RS, and BM Pumps
Operating Instructions Page 187
10 Technical Information
Specification* ISO-3100SD LPG-3400SD DGP-3600SD HPG-3200SD HPG-3400SD
Operating Principle Serial dual-piston pump
Compressibility
compensation Fully automated, independent of the composition of the mobile phase
Flow rate rage
Recommended
Settable
mL/min
0.05 - 10
0.001 - 10
mL/min
0.2 - 10
0.001 - 10
mL/min
0.1 - 10
0.001 - 10
Flow rate accuracy
±0.1%
Flow rate precision < 0.05% RSD or < 0.01 min SD, whichever is greater
Pressure range 2 - 62 MPa (290 - 9000 psi)
Pressure ripple
Typically <1% or <0.2 MPa, whichever is greater
Gradient formation N.a. Low-pressure
proportioning
Dual low-pressure
proportioning
High-pressure proportioning
Proportioning
accuracy N.a. ±0.5% of fullscale** ±0.2% of fullscale
Proportioning
precision N.a. <0.15% SD
Number of solvents 1 4 6 (2 x 3) 2 2 bzw. 2 aus 4
Gradient delay volume N.a. Standard: 690 µL
(325 - 1,840 µL with optional mixing
systems)
Standard: 400 µL
(35 - 1,550 µL with optional mixing
systems)
Solvent degassing External
(optional)
Built-in 4-channel
degasser
External
(optional)
External
(optional)
Weight 12.5 kg 13.6 kg 16.6 kg 16.3 kg 16.4 kg
Dimensions 16 x 42 x 51 cm (h x w x d)
PC connection
All functions controllable via USB (USB 1.1 or 2.0)
Integrated USB hub with three USB ports (USB 1.1 or 2.0)
I/O
Interfaces 2 digital inputs, 2 relay outputs
15-pin D-Sub port for connection of a Solvent Rack or degasser
Safety features
Leak sensor, active rear seal wash system, excess pressure monitoring
User input/display LCD indicating system parameters
Standby button
3 LEDs (Power, Connected, and Status) for status monitoring
4 function keys for operation during initial installation and maintenance
GLP features
In Chromeleon: Support of automatic equipment qualification (AutoQ) and System Wellness monitoring.
All system parameters are logged in the Audit Trail.
Wetted parts
Stainless steel, titanium, zirconium oxide (ZrO
2
), ruby. sapphire, aluminum oxide (Al
2
O
3
)
,
PEEK™, PTFE,
ECTFE,FEP, UHMW polyethylene, Kalrez
®
(not with ISO-3100SD), Teflon
®
AF (only LPG-3400)
Power requirements 100-120V, 60 Hz; 200-240V, 50 Hz; max. 150 VA
Emission sound
pressure level: < 70 dB(A) in 1-m-distance
Environmental
conditions
Range of use: Indoor use; temperature: 10 °C to 35 °C (50 to 95°F); air humidity: 80% relative humidity,
non-condensing; overvoltage category: II; pollution degree: 2
* Typical operating conditions for measurable specifications (SD pumps): 1 or 2 mL/min @ 8 MPa or 16 MPa
** Proportioning accuracy: Typically ± 1.0% of fullscale for combinations other than AB