Delta Modulon DPH series, Руководство пользователя

Страница: 21 / 250

2 - 9
2 Introduction
No. Description
1
The communication interfaces are located at two areas, (1) on the front of the
UPS with front door open and (2) at the rear of the touch panel. For relevant
information, please refer to
4. Communication Interfaces .
2
1. For 20 ~ 80kVA UPS, there are four power module slots. The top two slots
have covers but the bottom two do not.
2. For 20 ~ 120kVA UPS, there are six power module slots. The top three slots
have covers but the bottom three do not.
3. Please follow on-site requirements to install the correct number of power
modules (optional). Please refer to 5.8 Power Module (Optional) for
relevant information.
3
There is one STS module. For the STS module information, please refer to 5.7
STS Module .
NOTE:
For 20 ~ 80kVA UPS, its STS module’s size and weight are smaller and
lighter than that of 20 ~ 120kVA UPS.
4
The UPS has four breakers, which are Input Breaker (Q1), Bypass Breaker (Q2),
Manual Bypass Breaker (Q3) and Output Breaker (Q4). Please refer to
Figure
2-5 for the location of the four breakers.
INPUT
BREAKER
OUTPUT
BREAKER
BYPASS
BREAKER
MANUAL BYPASS
BREAKER
INPUT
BREAKER
OUTPUT
BREAKER
BYPASS
BREAKER
MANUAL BYPASS
BREAKER
(Internal View with Front Door Open)
Input
Breaker (Q1)
Manual Bypass
Breaker (Q3)
Bypass
Breaker (Q2)
Output
Breaker (Q4)
(Figure 2-5: Location of the Four Breakers)
5
Remove the four screws from the wiring terminal cover shown in Figure 2-6 to
see the wiring terminals ( Figure 2-7 ~ Figure 2-10 ).
INPUT
BREAKER
OUTPUT
BREAKER
BYPASS
BREAKER
MANUAL BYPASS
BREAKER
(Internal View with Front Door Open)
Screw x 4
Wiring Terminal Cover
(Figure 2-6: Wiring Terminal Cover & Screw Location)