manualshive.com logo in svg

Danfoss VLT AutomationDrive FC 301, Руководство по программированию, Страница: 451 / 722

Поделиться
Скачать
Danfoss VLT AutomationDrive FC 301 Скачать руководство пользователя страница 451

Select the switching pattern: 60° AVM or SFAVM.

N O T I C E

The drive may adjust the switching pattern automatically to avoid a trip.

Option

Name

Description

[0]

60 AVM

[1]*

SFAVM

Parameter 14-01 Switching Frequency

Table 702: Parameter 14-01 Switching Frequency

14-01 Switching Frequency

Default value: Size related

Parameter type: Option

Setup: All setups

Conversion index: -

Data type: Uint8

Change during operation: True

Select the drive switching frequency. Changing the switching frequency reduces acoustic noise from the motor. Default values de-
pend on power size.

N O T I C E

The output frequency value of the drive must never exceed 10% of the switching frequency. When the motor is running, adjust
the switching frequency in 

parameter 14-01 Switching Frequency

 to minimize motor noise.

N O T I C E

To avoid a trip, the drive can adjust the switching frequency automatically.

Option

Name

Description

[0]

1.0 kHz

[1]

1.5 kHz

Default switching frequency for 355–1200 kW [500–1600 hp], 690 V.

[2]

2.0 kHz

Default switching frequency for 250–800 kW [350–1075 hp], 400 V, and 37–315 kW [50–450 hp], 690 V.

[3]

2.5 kHz

[4]

3.0 kHz

Default switching frequency for 18.5–37 kW [25–50 hp], 200 V, and 37–200 kW [50–300 hp], 400 V.

[5]

3.5 kHz

[6]

4.0 kHz

Default switching frequency for 5.5–15 kW [7.5–20 hp], 200 V, and 11–30 kW [15-40], 400 V.

[7]

5.0 kHz

Default switching frequency for 0.25–3.7 kW [0.34–5 hp], 200 V, and 0.37–7.5 kW [0.5–10 hp], 400 V.

[8]

6.0 kHz

[9]

7.0 kHz

[10]

8.0 kHz

[11]

10.0 kHz

AU275636650261en-000101 / 130R0334 | 451

Danfoss A/S © 2022.12

Parameter Descriptions

VLT AutomationDrive FC 301/302

Programming Guide

Содержание VLT AutomationDrive FC 301



















































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов