manualshive.com logo in svg

Danfoss VLT AutomationDrive FC 301, Руководство по программированию, Страница: 32 / 722

Поделиться
Скачать
Danfoss VLT AutomationDrive FC 301 Скачать руководство пользователя страница 32

•
•
•
•
•
•
•
•

LCP keys

Description

e3

0b

p0

79

.1

0 

M enu 

S ta tus 

Q uick 

S etup 

M ain 

M enu 

P 2-03 

S etup 1 

Illustration 24: Main Menu/Quick Setup

[Back]

Returns to the previous step or layer in the navigation structure.

Naviga-
tion keys

The 2 navigation keys are used to navigate between the different options available in Quick Menu and Main Menu.
Press the keys to move the cursor.

[OK] 

Press to select a parameter marked by the cursor and to enable the change of a parameter.

Local control keys:

 Local control keys are at the bottom of the control panel.

Table 6: Local Control Keys and Description

LCP
keys

Description

[Hand
On]

Enables control of the drive via the LCP.
[Hand On] also starts the motor, and it is now possible to enter the motor speed data with the navigation keys. The
key can be selected as 

[1] Enable

 or 

[0] Disable via parameter 0-40 [Hand on] Key on LCP

.

External stop signals activated with control signals or a fieldbus override a start command via the LCP.
The following control signals are still active when [Hand On] is activated:

[Hand On] - [Off] - [Auto On]
Reset
Coast stop inverse
Reversing
Setup select lsb - Setup select msb
Stop command from serial communication
Quick stop
DC brake

[Off]

Stops the connected motor. The key can be selected as 

[1] Enable

 or 

[0] Disable via parameter 0-41 [Off] Key on LCP

.

If the external stop function is not selected and the 

[Off]

 key is inactive, the motor can be stopped by disconnecting

the voltage.

[Auto
On]

Enables the drive to be controlled via the control terminals and/or serial communication.
When a start signal is applied on the control terminals and/or the bus, the drive starts. The key can be selected as 

[1]

Enable

 or 

[0] Disable

 via 

parameter 0-42 [Auto on] Key on LCP

.

AU275636650261en-000101 / 130R0334

32 | Danfoss A/S © 2022.12

How to Program

VLT AutomationDrive FC 301/302

Programming Guide

Содержание VLT AutomationDrive FC 301



















































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов