manualshive.com logo in svg

Danfoss VLT AutomationDrive FC 301, Руководство по программированию, Страница: 38 / 722

Поделиться
Скачать
Danfoss VLT AutomationDrive FC 301 Скачать руководство пользователя страница 38

Option Name

Description

[3]

Set-up 3

[4]

Set-up 4

[9]

Multi Set-up

Remote setup selections using digital inputs and the serial communication port. This setup used the
settings from 

parameter 0-12 This Set-up Linked to

. Stop the drive before making changes to open-loop

and closed-loop functions.

Parameter 0-11 Edit Set-up

Table 12: Parameter 0-11 Edit Set-up

0-11 Edit Set-up

Default value: [1] Set-up 1

Parameter type: Option

Setup: All setups

Conversion index: –

Data type: Uint8

Change during operation: True

Select the setup to be edited (programmed) during operation, either the active setup or 1 of the inactive setups.

Option Name

Description

[0]

Factory setup Cannot be edited, but it is useful as a data source to return the other setups to a known state.

[1]*

Set-up 1

[1] Set-up 1

 to 

[4] Set-up 4

 can be edited freely during operation, independently of the active setup.

[2]

Set-up 2

[3]

Set-up 3

[4]

Set-up 4

[9]

Active Set-up Can also be edited during operation. Edit the selected setup from a range of sources: LCP, FC RS485, FC

USB, or up to 5 fieldbus sites.

AU275636650261en-000101 / 130R0334

38 | Danfoss A/S © 2022.12

Parameter Descriptions

VLT AutomationDrive FC 301/302

Programming Guide

Содержание VLT AutomationDrive FC 301



















































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов