manualshive.com logo in svg

Danfoss VLT AutomationDrive FC 301, Руководство по программированию, Страница: 216 / 722

Поделиться
Скачать
Danfoss VLT AutomationDrive FC 301 Скачать руководство пользователя страница 216

Option Name

Description

[229]

Vir. master on ref.

N O T I C E

This option is available only with software version 48.XX.

The virtual master is running on the set reference.

[231]

In power lim. mot.

N O T I C E

This option is only available in FC 302.

[232]

In power lim. gen.

N O T I C E

This option is only available in FC 302.

[233]

In power limit

N O T I C E

This option is only available in FC 302.

[234]

PE power off

[246]

Emcy mode was act.

The drive has been operating in emergency mode.

[247]

Emergency mode

The drive is operating in emergency mode. See 

parameter group 24-0* Emergency Mode

.

[249]

Emcy m. OPR un-
exptected

Emergency mode is not operating as expected, for example, live zero monitoring on an analog
input is activated.

[250]

Emcy mode limits

During emergency mode operation, 1 of the critical alarms has been activated and suppressed
by emergency mode. This may lead to reduced drive performance and expected lifetime before
service is required.

[254]

Testing emcy mode

Emergency mode was activated in a special test mode where the drive stops on all alarms.

Parameter 5-41 On Delay, Relay

Table 362: Parameter 5-41 On Delay, Relay

5-41 On Delay, Relay

Default value: 0.01 s

Parameter type: Range, 0.01 – 600 s, Array [9]

Setup: All setups

Conversion index: -2

Data type: Uint16

Change during operation: True

Enter the delay of the relay cut in time. Select 1 of 2 internal mechanical relays in an array function. See 

parameter 5-40 Function

Relay

 for details.

AU275636650261en-000101 / 130R0334

216 | Danfoss A/S © 2022.12

Parameter Descriptions

VLT AutomationDrive FC 301/302

Programming Guide

Содержание VLT AutomationDrive FC 301



















































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов