manualshive.com logo in svg

Danfoss VLT AutomationDrive FC 301, Руководство по программированию, Страница: 31 / 722

Поделиться
Скачать
Danfoss VLT AutomationDrive FC 301 Скачать руководство пользователя страница 31

•
•
•

Table 4: Functional Groups of NLCP

1

Numerical display.

2

Menu keys and indicator lights - changing parameters and switching between display functions.

3

Navigation keys and indicator lights.

4

Operation keys and indicator lights.

Display line

Status messages showing icons and numeric value.

Indicator lights

Green LED/On: indicates if control section is on.
Yellow LED/Wrn: indicates a warning.
Flashing red LED/Alarm: indicates an alarm.

4.2.1 LCP Keys

The control keys are divided into functions. The keys below the display and indicator lights are used for parameter setup, including
option of display indication during normal operation.

Table 5: LCP Keys and Description

LCP keys

Description

[Status]

Indicates the status of the drive and/or the motor.
If an alarm occurs, the NLCP automatically switches to status mode. Several alarms can be shown.

N O T I C E

Parameter copy is not possible with LCP 101 numerical local control panel.

e3

0b

p0

77

.1

0 

22.8 

r pm 

S etup  1 

Illustration 22: Status Mode

S etup 1  

e3

0b

p0

78

.1

0 

A 17 

Illustration 23: Alarm

[Quick
Menu]/
[Main
Menu]

Used for programming the parameters in the Quick Menu and Main Menu, respectively. When the value flashes,
press [

▵

] or [

▿

] to change parameter values. Parameters with functional options show values such as [1], [2], and so

on. For a description of the different options, see the individual parameter descriptions in 

5 Parameter Descriptions

.

AU275636650261en-000101 / 130R0334 | 31

Danfoss A/S © 2022.12

How to Program

VLT AutomationDrive FC 301/302

Programming Guide

Содержание VLT AutomationDrive FC 301



















































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов