Danfoss VLT AutomationDrive FC 301, Руководство по программированию, Страница: 212 / 722

Option Name Description
[47] Bus ctrl, 0 if timeout Controls output via bus. The state of the output is set in parameter 5-90 Digital & Relay Bus
Control . If a bus timeout occurs, the output state is set low (off).
[50] On reference
[51] MCO controlled
[59] Remote, enable, no TW
[60] Comparator 0 See parameter group 13-1* Comparators . If comparator 0 in SLC is true, the output goes high.
Otherwise, it is low.
[61] Comparator 1
See parameter group 13-1* Comparators . If comparator 1 in SLC is true, the output goes high.
Otherwise, it is low.
[62] Comparator 2
See parameter group 13-1* Comparators . If comparator 2 in SLC is true, the output goes high.
Otherwise, it is low.
[63] Comparator 3
See parameter group 13-1* Comparators . If comparator 3 in SLC is true, the output goes high.
Otherwise, it is low.
[64] Comparator 4
See parameter group 13-1* Comparators . If comparator 4 in SLC is true, the output goes high.
Otherwise, it is low.
[65] Comparator 5 See parameter group 13-1* Comparators . If comparator 5 in SLC is true, the output goes high.
Otherwise, it is low.
[66] Comparator 6 See parameter group 13-1* Comparators . If comparator 6 in SLC is true, the output goes high.
Otherwise, it is low.
[67] Comparator 7 See parameter group 13-1* Comparators . If comparator 7 in SLC is true, the output goes high.
Otherwise, it is low.
[68] Comparator 8 See parameter group 13-1* Comparators . If comparator 8 in SLC is true, the output goes high.
Otherwise, it is low.
[69] Comparator 9
See parameter group 13-1* Comparators . If comparator 9 in SLC is true, the output goes high.
Otherwise, it is low.
[70] Logic rule 0
See parameter group 13-4* Logic Rules . If logic rule 0 in SLC is true, the output goes high. Oth-
erwise, it is low.
[71] Logic rule 1
See parameter group 13-4* Logic Rules . If logic rule 1 in SLC is true, the output goes high. Oth-
erwise, it is low.
[72] Logic rule 2 See parameter group 13-4* Logic Rules . If logic rule 2 in SLC is true, the output goes high. Oth-
erwise, it is low.
[73] Logic rule 3 See parameter group 13-4* Logic Rules . If logic rule 3 in SLC is true, the output goes high. Oth-
erwise, it is low.
[74] Logic rule 4 See parameter group 13-4* Logic Rules . If logic rule 4 in SLC is true, the output goes high. Oth-
erwise, it is low.
[75] Logic rule 5 See parameter group 13-4* Logic Rules . If logic rule 5 in SLC is true, the output goes high. Oth-
erwise, it is low.
[76] Logic rule 6
See parameter group 13-4* Logic Rules . If logic rule 6 in SLC is true, the output goes high. Oth-
erwise, it is low.
[77] Logic rule 7
See parameter group 13-4* Logic Rules . If logic rule 7 in SLC is true, the output goes high. Oth-
erwise, it is low.
AU275636650261en-000101 / 130R0334 212 | Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide