Inteli NT MINT, SW Version 2.6, ©ComAp – November 2011
IGS-NT-MINT-2.6-Reference Guide.PDF
79
Gateway IP
[ - ]
In fixed settings mode this setpoint is used to adjust the IP address of the gateway of the network segment
where the controller is connected.
In Automatic settings mode this setpoint is used to display the gateway IP address which has been assigned
by the DHCP server.
A gateway is a device which connects the respective segment with the other segments and/or Internet.
ComApProtoPort
[ 1 to 255 ]
This setpoint is used to adjust the port, which is used for ethernet connection to a PC with any of ComAp PC
program (i.e. InteliMonitor, GenConfig). This setpoint should be adjusted to 23, which is the default port used
by all ComAp PC programs. A different value should be used only in special situations as e.g. sharing one
public IP address among many controllers or to overcome a firewall restrictions.
AirGate
[ DISABLED / ENABLED ]
This setpoint selects the ethernet connection mode.
DISABLED: This is a standard mode, in which the controller listens to the incoming traffic and
answers the TCP/IP queries addressed to him. This mode requires the controller to be
accessible from the remote device (PC), i.e. it must be accessible at a public and static IP
address if you want to connect to it from the Internet.
ENABLED: This mode uses the "AirGate" service, which hides all the issues with static/public address into a
black box and you do not need to take care about it. You just need only a connection to the
Internet. The AirGate address is adjusted by the setpoint
AirGate addr
.
AirGate IP
[ - ]
This setpoint is used for entering the domain name or IP address of the AirGate. Use the free AirGate
provided by ComAp at address airgate.comap.cz if your company does not operate it's own AirGate.
SMTP authent
[ DISABLED / ENABLED ]
Switch this setpoint to ENABLED if your SMTP server requires authentificated access. You have also adjust
SMTP user name and SMTP password. Ask your internet provider or IT manager for this information.
Hint:
Most of public free SMTP servers require authentification. You will get instructions when you register to the
freemail service.
SMTP user name
[ - ]
Use this setpoint to enter the user name for the SMTP server if SMTP authentification is enabled.
SMTP password
[ - ]
Use this setpoint to enter the password for the SMTP server if SMTP authentification is enabled.
SMTP address
[ - ]
This setpoint is used for entering the domain name (e.g. smtp.yourprovider.com) or IP address (e.g.
74.125.39.109) of the SMTP server. Please ask your internet provider or IT manager for this information.
Hint:
You may also use one of free SMTP servers, e.g. smtp.gmail.com. However, please note that some free
SMTP servers may cause delays (in hours..) when sending e-mails.
If you do not want to send active e-mails, you may leave this setpoint blank, as well as other setpoints
related to SMTP server and e-mail settings.
Proper setting of SMTP-related setpoints as well as controller mailbox are essential for sending alerts via e-
mails
